Sprinkler Hose, Agricultural Irrigation Pipe

Improveming Shallow-rooted Plants Drip Irrigation Efficiency with Sprinkler Hose Under Mulch Film

Use right technique to get efficient irrigation are crucial to ensure optimal shallow-rooted plants growth and maximize yields. One such innovative method that has gained prominence in recent years is the use of sprinkler hose under mulch film. This irrigation approach not only conserves water but also offers a multitude of benefits for crop health and overall yield. Here we explore the advantages and step-by-step instructions for implementing this efficient irrigation system.

The Efficiency Challenge
Most crops, especially shallow-rooted plants, often face challenges when it comes to traditional drip irrigation. Drip irrigation systems penetrate vertically into the soil, and the water tends to seep too deep for the shallow roots to absorb efficiently. This results in wasted water resources, as the roots cannot access the moisture effectively. To overcome this challenge, traditional drip irrigation systems employ multiple short bursts of intermittent irrigation, which can be time-consuming and labor-intensive.

The Solution: Sprinkler Hose Under Mulch Film
Sprinkler hose under mulch film presents a simpler and more effective alternative to traditional drip irrigation. This innovative system diffuses water over a wider area in a shorter time, allowing crops to absorb the moisture efficiently. When compared to drip irrigation, it proves to be an easy, time-saving, and labor-efficient method. Furthermore, it addresses the specific needs of shallow-rooted plants.

Installation Process
Implementing a sprinkler hose under mulch film system is relatively straightforward. Here's a step-by-step guide to getting it right:

Lay the Sprinkler Hose: Begin by laying the sprinkler hose along the rows scheduled for planting or had planted. This hose placement ensures that water will reach the roots effectively.

Apply the Mulch Film: Next, lay the mulch cover over the sprinkler hose. This combined process can be efficiently completed using specialized tools designed for lay the sprinkler hose and mulch film the same time.

Let Plants Come Out: The plants should emerge from holes that have been punched in the mulch film. This allows them not covered by mulch film.

Fertigation Integration: For optimal results, consider integrating a fertigation system at the head of the irrigation system. This addition allows for the simultaneous delivery of liquid fertilizer or pesticides directly to the plant roots along with the irrigation water.

Benefits of Sprinkler Hose Under Mulch Film
Now that we've covered the installation process, let's delve into the advantages of using this innovative irrigation method:

1. Reduction in the Leaching of Fertilizer
Traditional flood and furrow irrigation methods tend to leach fertilizers, including valuable nitrogen and other nutrients, deep into the soil beyond the reach of plant roots. Sprinkler hose under mulch film, in combination with plastic mulch film, significantly reduces this leaching effect. It delivers lower amounts of water and fertilizers directly to the root zone, reducing the amount of fertilizer needed for optimal plant growth.

2. Making Weed More Manageable
Plastic mulches film, often used in conjunction with sprinkler hose under mulch film, create an environment that inhibits weed growth. By preventing sunlight from reaching the soil, these mulch films effectively reduce weed competition. Any weed growth tends to be limited to the holes in the mulch where plants emerge, making weed management more manageable.

3. Ensuring Consistent Soil Moisture Levels
Plastic mulch films not only suppress weeds but also reduce water loss through evaporation. This means less water is required for irrigation, making it a sustainable choice. Furthermore, plastic mulch films help sprinkler hoses distribute moisture evenly in the soil, reducing plant stress and ensuring consistent soil moisture levels.

Conclusion
In summary, the utilization of sprinkler hose under mulch film is a game-changer in modern agriculture. This innovative irrigation system addresses the challenges faced by shallow-rooted crops and drip irrigation, offering a more efficient and cost-effective alternative to traditional drip irrigation. By reducing water wastage, improving fertilizer efficiency, and enhancing overall crop health, this method contributes to higher yields and increased profits for farmers.

DEAR DEER Monotube Irrigation Sprinkler Hose AJ-101
the optimal and simplest solution for farm irrigation and garden irrigation

AJ-101 monotube irrigation sprinkler hose serves as the fundamental type among DEAR DEER irrigation sprinkler hoses, specifically designed for easy irrigation efficiency. This type of hose presents itself as a single flat conduit, marked by its simplicity and cost-effectiveness.

Recognized by various names such as rain pipe, rain tape, and micro spray tube, the single irrigation sprinkler hose is characterized by its flat hose featuring numerous pores for a finely misted water dispersion. Operate effectively under low water pressure, this hose boasts energy-efficient performance due to its low-pressure irrigation. Farmers can ensure uniform water distribution. The user-friendly installation procedure saves time and effort, contributing to the overall efficiency of the irrigation system.

The AJ-101 monotube irrigation sprinkler hose is designed for versatility. It suits different crop types and can be employed in various agricultural settings, including open farmlands, sandy terrains, greenhouses, and net houses. This adaptability makes it an invaluable tool for farmers with diverse cultivation requirements.

In cases where the sprinkler hose is laid on the ground, water is sprayed upwards into the air before gently descending, creating an effect akin to a light rain shower, to irrigate the crops below. This unique quality has earned it monikers such as "rain pipe," "rain tape".

DEAR DEER monotube sprinkler hose is adaptable and can be used for irrigation beneath mulch film. By directing water through hose pores under mulch film directly onto the crop roots, it enhances moisture absorption and promotes optimal plant growth. This adaptability allows farmers to cater to various crop needs within an irrigation system.

The diverse adaptability of DEAR DEER monotube sprinkler hose comes from the fact that it can design spray pores of different sizes and diverse pore arrangements according to different crops and fields. Furthermore, DEAR DEER sprinkler hose also comes in different hose types. For the same sprinkler irrigation system, farmers can meet different needs as long as they choose appropriate DEAR DEER sprinkler hose.

All types of the irrigation sprinkler hose, offered by DEAR DEER, boast a flat configuration punctuated by an array of pores designed to emit a mist-like water distribution. Operating as a high efficiency micro irrigation tool, the sprinkler hose irrigation system is characterized by its user-friendly installation, easy maintenance, cost-effectiveness, efficient plug clearing, rapid irrigation capabilities, minimal water pressure and energy consumption requirements.

One of the most remarkable features of DEAR DEER sprinkler hose is its energy-efficient performance. Operate effectively under low water pressure, the hose disperses water with precision. This not only conserves water but also minimizes energy consumption, making it an environmentally friendly and low-carbon choice for farmers.

This micro irrigation hose is ideally suited for a diverse range of dry land crops. Available in various types and pore designs, these hoses are tailored to cater to different crop varieties and agricultural settings. They find utility in open farmlands, sandy terrains, greenhouses, and net houses. Particularly beneficial for crops requiring precise micro-irrigation, most types of sprinkler hoses provide the necessary moisture with precision.

The installation and maintenance of the sprinkler hose irrigation system are notably straightforward, featuring minimal risk of clogging. These attributes contribute to the system's distinction as one of the most cost-effective micro irrigation methods compares to drip systems.

The integration of a fertigation system at the head of the irrigation network can also facilitate the direct delivery of liquid fertilizers to carry out foliar fertilizers or run to the crops' root systems through the water supply.

By designing appropriately sized pores, a sprinkler hose can even emulate the functionality of a drip tape. This adaptation operates under reduced pressure, resulting in significantly fewer instances of clogging and consuming less time compared to traditional drip pipes.

All types of DEAR DEER sprinkler hose irrigation systems have the notable advantage of being capable of functioning need no filter at the head of the irrigation network, particularly if the water being used is relatively clean. Sometimes, it suffices to open the end clip of the sprinkler hose to flush out any accumulated dirt within the hose, maintaining the system's efficiency.

Frequently Asked Questions

1. What is the lifespan of the AJ-101 monotube sprinkler hose?
DEAR DEER AJ-101 monotube sprinkler hose typically lasts for 2-5 years, depending on usage and maintenance practices.

2. Can the hose be used for different crop types?
Absolutely, the AJ-101 monotube sprinkler hose is versatile and suitable for a wide range of crops, catering to diverse agricultural needs.

3. Is maintenance complicated?
No, maintenance is straightforward due to the hose's minimal risk of clogging. Periodic checks and simple flush procedures are sufficient to maintain its efficiency.

4. How is the sprinkler hose irrigation system installed?
Sprinkler hose irrigation systems are installed similar to drip irrigation systems, but it is easier. The sprinkler hose irrigation system is installed need no filter at the head, particularly if the water being used is relatively clean.





DEAR DEER AJ-101 monotube irrigation sprinkler hose is the basic type of sprinkler hose. This type is a single flat hose, simple and low price. To lay this hose we had better pull in the hose tensely, clamp it at the end and fix the end clip on the ground. This reduces turn aside spraying when the flat hose expands into a cylindrical and irrigate.
Sprinkler hose irrigation systems can operate without filters at head if the water is not very dirty. It only needs to open the end clip on the sprinkler hose sometimes and flush out dirt inside the hose.
In addition, sprinkler hoses can irrigate under mulch film to flow water at the downside of mulch film and wet the crop directly. Add a fertigation system at the beginning of the irrigation system, it can bring fertilization with water to the roots of crops directly.
With the suitable pores, a sprinkler hose can be a drip tape. It operates under low pressure with much less blocking, spending less time than a drip pipe.

Sprinkler hose is a flat hose with thin wall to be punched continuously under certain distance of perforations (the distance could be custom required or at regular patterns distance) on one side of the hose, it was now well used around the world in farm and garden irrigation, and probably the easiest and cheapest way of irrigation which with most high efficiency and lowest labor cost way of modern irrigation. It irrigates gently, just like natural light rain.
Irrigation Sprinkler Hose is also named as rain tape, rain pipe, rain hose, micro irrigation spray tube, micro spray hose, soaker hose, kansui tube, selang irigasi, Taiwan irrigation sprinkler hose. AJ-101 is a single hose. The cheapest irrigation hose.

• This flat irrigation hose were also named as rain tape, rain pipe, spray tube, rain hose, perforated tube, the sprinkler hose etc. In different area or countries. The micro water spray produced by sprinkler hose will make it the mistiest irrigation system, it's much more mistier and softer than traditional sprinklers. It's easy to be installed, with T fittings or cross fittings, alone with rigid pipes or flexible tubes and control valve to form a farm irrigation system, easy to maintain, high efficientcy, low labor cost, easy clog elimination, and with only very low pressure & energy to operate.
• This system is especially useful for field irrigation of crops and plants which need water in short time in dry farmland. The service life of sprinkler hose is around 2 to 5 years depends on how your maintenance is and the way you use it. If you use it under the cover of mulch, it even can be used longer. But please be noted: this system is basically used under low working pressure only.

• If you need to irrigate for a longer distance, or you use it under higher pressure, then you need a thicker one which can be customized, Our regularly product of hose thickness is now ranged 0.2 mm~0.425 mm, working pressure ranged from 0.5 bar to 1.2 bar. And it is better keep it

• Most of our sprinkler hoses are for laid on ground except AJ-104H or AJ-105 which were hanging up in the air to spray downward. But all of them are flexible tubes.

• When use sprinkler hose to irrigate. You should first close the end of hose with end clip and then open the water to flow into hose. The water then sprays out evenly on the farmland on both sides of the hose.

• If the water is clean enough, there is not need to use filter. If the water is bit of turbid, you just to open the end clip once in a while and let the sand flush out to keep away from clogging.
• This Single Sprinkler Hose can be used as the drip hose too in shorter length, once pressure is very low.

• Our company can design and produce different types of perforation on this flat hose for different need. Our sprinkler hose brand "DEAR DEER" is famous in China, South East Asia and Taiwan and wined high reputation. And now, our products are continually expanding to more countries around the world.

From Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/Micro-irrigation

Micro-irrigation, also called localised irrigation, low volume irrigation, low-flow irrigation, or trickle irrigation is an irrigation method with lower pressure and flow than a traditional sprinkler system. Low volume irrigation is used in agriculture for row crops, orchards, and vineyards. It is also used in horticulture in wholesale nurseries, in landscaping for civic, commercial, and private landscapes and gardens, and in the science and practice of restoration ecology and environmental remediation.


Contents
Description
There are several types of micro-irrigation systems. Many of the components are the same for all of these types of systems. Most systems typically include filters, pipes, valves, and tubing. The main difference is in the type of emission device that is used to deliver the water to the plants. Drip irrigation utilizes drip emitters that deliver water at very low rates. The typical range is 0.2 to 4.0 gallons per hour. In some systems, the emitters are installed manually on the outside of the tubing and placed where needed. Other systems might use integral dripper line or drip tape with the emitters already installed at a predetermined spacing. Micro-sprinklers, which can include fixed stream sprays and rotating spinners typically deliver water at a higher rate, such as 10 to 25 gallons per hour and will cover a larger area than drip emitters. These are more typically used in tree orchards where the plants are larger. The goal is to distribute water slowly in small volumes and target it to plants' root zones with less runoff or overspray than landscape and garden conventional spray and rotary sprinklers. The low volume allows the water to penetrate and be absorbed into slow-percolation soils, such as clay, minimizing water runoff.

System components
There are a wide variety of system components included in a micro-irrigation systems. Most systems include a filter. These may include pre-filters, sand separators, media filters, screen filters, and disc filters. The level of filtration required depends on the size of the emission device and the quality of the water source. A pressure regulator or regulating valve may be required to reduce the system pressure to the desired level. Automatic or manually operated valves will be required to switch from one irrigated section to another. An irrigation controller will be used with automatic systems and may also be needed for back flushing the filter or sand separator. Since water conservation is a frequent reason for choosing micro-irrigation systems, soil moisture sensors, rain shutoff sensors, and sometimes even weather stations may be installed.

Emission devices
Microtubing
Microtubing is one of the oldest types of drip irrigation devices and was used in greenhouses in the 1970s. It consists of a very small diameter tubing. Flow is regulated purely by the length and diameter of the tubing. Weights or stakes are sometimes attached to the end of the tubing to keep it in place.

Fixed flow drip emitters
Low-flow irrigation systems in gardens using drip apply water through two methods:

pre installed small holes in small diameter tubes placed on or below the surface or
self cleaning emitters, in different precipitation rates, pre installed or contractor installed for different rate emitters on same supply line (i.e. trees-higher, perennials-lower). The Flexible supply pipe can be buried either underground or pinned on the surface and buried under
Low volume irrigation systems often use the two delivery components of drip systems to apply water through small holes in small diameter tubes placed on or below the surface of the field. This is done instead of agricultural surface irrigation and furrow irrigation for vegetables, fruits and berries, and other high-value crops.

Adjustable drip emitters
Trickle emitters, also called 'spider sprays,' come in fixed or adjustable radius shapes and diameters, and are installed directly on the flexible supply pipe or on tubing connected to it, and mounted on small stakes. Trickle emitter-'Spider sprays' work well for plants with more fibrous root systems, tree and large shrub basins, and in pots and container gardens - allowing automated watering of plants on decks and patios. Mist emitters can also be used in pot, both on the ground and hanging, with humidity-fog watering for epiphytes and ferns replicating habitats.

In the Horticulture industry, wholesale growers and plant nurseries often use the trickle emitters for 5-US-gallon (19 L) and larger container stock, to automate watering. Attached to longer supply tubing on short stakes, they are easily movable to new containers when stock is moved or sold. Mist emitters are used for propagation, epiphytes, and other plants needing higher humidity.

Micro-sprinklers
Low volume micro-sprinklers may be attached to hard plastic risers or attached to standard sprinkler heads, but are more typically mounted on stakes and attached to small diameter micro-tubing connected to polyethylene tubing with a barbed connector. Some micro-sprinklers have a fixed spray or stream pattern, while others rotate. These are installed above ground and are often used for fruit and nut orchards and vineyards. These systems are expensive, even for large-scale agricultural use, and are predominantly used for high-value crops.

Macro-Drip irrigation
High-volume, low-pressure irrigation systems for container gardening are known as Macro-Drip. A pressure regulator lowers the water pressure to under 30 pounds per square inch while a relatively large diameter hose or pipe delivers the water directly to a sprinkler head.[1] This allows a larger volume of water to reach the flowerpot in a short amount of time, which will then be absorbed into the roots of the plant.

Sprinkler
Sprinkler Irrigation[2] is the process of providing water to your land. This process works with the number of pipes. It is then partitioned with the help of Sprinklers that spreads the water all over in an equal balance. One can gain optimum solutions by installing sprinkler Irrigation. Sprinkler Irrigation helps in decreasing the labor cost saves upto 20% - 40% water supply. It can be applied to any soil that helps to increase crop production. There are a wide variety of sprinklers available in the market. One can choose carefully from the best of sprinkler systems.

Ecological restoration and phytoremediation projects
Low-flow irrigation systems are used on some native plant habitat restoration and environmental remediation projects. The lower operating pressure can be the only choice for remote locations with wells or small storage tank water sources. It is used in temporary installations during initial establishment periods, and being on the soil surface easily removable with minimal damage to the recovering plant community. An example is its use in riparian zone restoration, and environmental remediation projects using Phytoremediation and Bioremediation techniques.

Water conservation and regulations
As municipal and agricultural water supplies become more limited; through increased population demands, droughts, and climate change; city, water district, and state-province level regulations and codes are beginning to encourage, offer rebates with use, or mandate significantly reduced water allowances, at higher costs, that are bringing many water conservation products and techniques both to the forefront and more competitively matched to traditional irrigation system costs.

Use of micro-irrigation systems on green building candidate projects can help them to accumulate points for LEED - (Leadership in Energy and Environmental Design) certification rating and awards.

See also
Deficit irrigation
Drip irrigation
Irrigation in viticulture
Groundwater recharge
Water conservation
References
Garden Time TV (2019-04-26), Daisy Rain Garden System, retrieved 2019-04-29
"How do Sprinkler Irrigation Systems Work? | Automat Industries". Automat Irrigation Blog. 2019-08-06. Retrieved 2019-09-18.
This article incorporates public domain material from the Congressional Research Service document "Report for Congress: Agriculture: A Glossary of Terms, Programs, and Laws, 2005 Edition" by Jasper Womach.
External links
DWP-Be Water wise blog: "The Garden Spot"
Categories: Irrigation Low-flow irrigation systems Water conservation Sustainable agriculture Sustainable gardening



What is the best pipe for irrigation system?
Our irrigation sprinkler hose is one of best pipes for irrigation.

How does a lawn irrigation system work?
Use our irrigation sprinkler hose can irrigate garden or lawn well.

How much is irrigation pipe?
Sprinkler hose irrigation is an excellent choice of low cost.

How do you connect PVC to sprinklers?
Our irrigation sprinkler hose has many fittings to connect PVC pipe.

Maximizing Irrigation Efficiency with AJ-102 DEAR DEER Twin Irrigation Sprinkler Hose

In the realm of agriculture and horticulture, efficient irrigation is important. Water is the lifeblood of crops, and optimizing its efficiency is essential for healthy plant growth and abundant yields. The AJ-102 DEAR DEER Twin Irrigation Sprinkler Hose is an efficient tool in the world of irrigation systems. We will introduce the capabilities and advantages of this innovative product, exploring how it can revolutionize your farming practices.

Understanding the AJ-102 DEAR DEER Twin Irrigation Sprinkler Hose
The AJ-102 DEAR DEER Twin Irrigation Sprinkler Hose stands out as the premium products of stability and efficiency in the world of sprinkler hoses. Designed to address the common trouble of undesirable side spraying that plagues single sprinkler hoses, we engineered this product to save both time and labor costs associated with field patrolling.

The comments of a general Sprinkler Hose
Before we dive into the exceptional features of the AJ-102 DEAR DEER Twin Irrigation Sprinkler Hose, let's first understand what a general sprinkler hose is and how it functions. A general sprinkler hose is a single flat hose equipped with numerous pores along its length, allowing it to spray water in a fine mist. This versatile tool goes by various names, including rain pipe, rain tape, micro spray tube, and more.

Easy Installation and Maintenance
One of the standout advantages of the sprinkler hose irrigation system is its ease of installation and maintenance. Unlike complex drip irrigation systems that require specialized knowledge and equipment, all types of the Irrigation Sprinkler Hose can be effortlessly set up and maintained by individuals of general skill levels.
Additionally, all types of sprinkler hoses irrigation system boast low operational costs, making it an economical choice for both small and large-scale agricultural operations. It excels in quick irrigation and is remarkably efficient with low water pressure, resulting in minimal energy consumption.

The Challenge of Single Sprinkler Hoses
Traditional single flat hoses have a challenge when it comes to stability. When filled with water, this hose expands into a cylindrical shape, making some sections of hose body easy to turn aside for them to veer off course. Consequently, the water sprays from the pores may not reach their intended target, leading to water wastage and ineffective irrigation. Farmers have to patrol to find and correct the hose body under the condition of water spraying. It is extremely laborious.

The Ingenious Solution: Twin Sprinkler Hoses
The AJ-102 DEAR DEER Twin Sprinkler Hose, however, offers a brilliant solution to this problem. It consists of two hoses with pores, ingeniously linked together. Two hoses provide mutual support, ensuring exceptional stability and precise water distribution. This innovative design guarantees that water is sprayed exactly where it is needed, eliminating the need for constant patrolling and adjustments, save much time and labor cost.

Versatility for Various Crops and Farmlands
In addition of different shapes of hoses, sprinkler hose also can be designed in different pores arrangements to meet different irrigation needs.
The flexibility of the sprinkler hose irrigation system makes it suitable for a wide range of crops and different types of the farmland. Different hose variations and watering pore patterns cater to the specific needs of diverse crops and farming conditions. Whether you're tending to plant in open farmland, sandy soil, greenhouses, or net houses, Sprinkler Hose proves to be a versatile and adaptable choice. The AJ-102 DEAR DEER Twin Sprinkler Hose further offer the stable function.

Ideal for Crop Nurseries and Water-Intensive Plants
Sprinkler hose irrigation system shines particularly bright when it comes to crop nurseries and plants that require significant water intake in a short time. Stable hose makes the precise control over water distribution ensures that our plants receive the water they need without wastage.

Longevity and Durability
Investing in an irrigation system is a long-term commitment, and the AJ-102 DEAR DEER Twin Sprinkler Hose is built to last. With proper usage and maintenance, this reliable hose can serve you well for approximately 2 to 5 years. In addition, we can rewind the Twin Sprinkler Hose to store after harvest to increase its lifespan. Its longevity is a performance to its quality and durability, offering peace of mind for farmers and gardeners alike.

In conclusion, the AJ-102 DEAR DEER Twin Irrigation Sprinkler Hose emerges as an excellent solution for efficient and cost-effective irrigation in farm irrigation and garden irrigation. Its stability, precision, and adaptability make it a top choice for a wide range of agricultural applications. Want to say goodbye to the challenges of traditional single sprinkler hoses? Embrace the future of irrigation with the AJ-102 DEAR DEER Twin Sprinkler Hose.

• AJ-102 DEAR DEER Twin Irrigation Sprinkler Hose is the type of most stable sprinkler hose. It is best designed to overcome the problem of spraying aside of the single sprinkler hose. Saves a lot of labor cost to patrol in the field to find side sprays and turn the hoses. A sprinkler hose is a flat hose with many pores on the hose to spray water mistily, also named as rain pipe, rain tape, micro spray tube and so on. Sprinkler hose irrigation system easy to install, easy to maintain, low cost, easy plug clearing, quick irrigation, and low water pressure, low energy consumption. When laid on the ground, water is sprayed upwards. At first, a sprinkler hose is a simple single flat hose. When filled with water, the flat hose expands into a cylindrical, that makes the hose body easy to turn aside, so that the sprays from pores are turned aside, the water falls down at the wrong areas too. Far away from the areas we want to irrigate. Therefore, when water is spraying, we must patrol in the field to find side sprays and turn the hose, letting the sprays back in the correct direction. This is tiresome work, wasting a lot of labor cost and makes us wet all over. AJ-102 DEAR DEER Twin Sprinkler Hose is 2 hoses with pores and linking together. The trends of 2 hoses limited each other. That makes it very stable, and keeps water spraying in the right direction. Sprinkler hose irrigation system is suitable for any dry land crops. There are different types of hose, different watering pore pattern, for different crops and different farmlands. Can be used to open farmland, sandy land, greenhouses, net house etc. Especially it is suitable for crop nursery or the plants require more water in short time. The use life of sprinkler hose is about 2-5 years, depending on how to use and how to maintain. . 

• Irrigation sprinkler hose is a tape like flat garden hose. This flat garden hose have many tiny pores on the flat hose wall. It is a micro irrigation system, with water which sprayed mistier than any sprinklers. Sprinkler hose is also said as sprinkler tape, rain tape, rain pipe, rain hose, micro spray tube, micro spray hose, soaker hose, kansui tube, selang irigasi etc. It irrigates gently, just like natural light rain. You can easily install several sprinkler hoses with T fittings, rigid pipes or flexible pipes and control valve as a farm irrigation system which easy to be maintained, cost-efficient, easy clog elimination, short irrigation time, low irrigation pressure, low energy consumption. It is useful for field irrigation of crops in dry farmland.

• There are different ways to irrigate different type of farming such as open field, greenhouse or net house etc. This flat hose is especially useful for the plants which need to be watering in a short time.

• The useful lifetime of sprinkler hose is around 2 to 5 years depended on situation how your use it. Our sprinkler hose branded "DEAR DEER" is famous with high reputation in China, South East Asia and Taiwan. And now our "DEAR DEER" products are continually expanding to more and more countries around world.

From Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/Micro-irrigation

Micro-irrigation, also called localised irrigation, low volume irrigation, low-flow irrigation, or trickle irrigation is an irrigation method with lower pressure and flow than a traditional sprinkler system. Low volume irrigation is used in agriculture for row crops, orchards, and vineyards. It is also used in horticulture in wholesale nurseries, in landscaping for civic, commercial, and private landscapes and gardens, and in the science and practice of restoration ecology and environmental remediation.


Contents
Description
There are several types of micro-irrigation systems. Many of the components are the same for all of these types of systems. Most systems typically include filters, pipes, valves, and tubing. The main difference is in the type of emission device that is used to deliver the water to the plants. Drip irrigation utilizes drip emitters that deliver water at very low rates. The typical range is 0.2 to 4.0 gallons per hour. In some systems, the emitters are installed manually on the outside of the tubing and placed where needed. Other systems might use integral dripper line or drip tape with the emitters already installed at a predetermined spacing. Micro-sprinklers, which can include fixed stream sprays and rotating spinners typically deliver water at a higher rate, such as 10 to 25 gallons per hour and will cover a larger area than drip emitters. These are more typically used in tree orchards where the plants are larger. The goal is to distribute water slowly in small volumes and target it to plants' root zones with less runoff or overspray than landscape and garden conventional spray and rotary sprinklers. The low volume allows the water to penetrate and be absorbed into slow-percolation soils, such as clay, minimizing water runoff.

System components
There are a wide variety of system components included in a micro-irrigation systems. Most systems include a filter. These may include pre-filters, sand separators, media filters, screen filters, and disc filters. The level of filtration required depends on the size of the emission device and the quality of the water source. A pressure regulator or regulating valve may be required to reduce the system pressure to the desired level. Automatic or manually operated valves will be required to switch from one irrigated section to another. An irrigation controller will be used with automatic systems and may also be needed for back flushing the filter or sand separator. Since water conservation is a frequent reason for choosing micro-irrigation systems, soil moisture sensors, rain shutoff sensors, and sometimes even weather stations may be installed.

Emission devices
Microtubing
Microtubing is one of the oldest types of drip irrigation devices and was used in greenhouses in the 1970s. It consists of a very small diameter tubing. Flow is regulated purely by the length and diameter of the tubing. Weights or stakes are sometimes attached to the end of the tubing to keep it in place.

Fixed flow drip emitters
Low-flow irrigation systems in gardens using drip apply water through two methods:

pre installed small holes in small diameter tubes placed on or below the surface or
self cleaning emitters, in different precipitation rates, pre installed or contractor installed for different rate emitters on same supply line (i.e. trees-higher, perennials-lower). The Flexible supply pipe can be buried either underground or pinned on the surface and buried under
Low volume irrigation systems often use the two delivery components of drip systems to apply water through small holes in small diameter tubes placed on or below the surface of the field. This is done instead of agricultural surface irrigation and furrow irrigation for vegetables, fruits and berries, and other high-value crops.

Adjustable drip emitters
Trickle emitters, also called 'spider sprays,' come in fixed or adjustable radius shapes and diameters, and are installed directly on the flexible supply pipe or on tubing connected to it, and mounted on small stakes. Trickle emitter-'Spider sprays' work well for plants with more fibrous root systems, tree and large shrub basins, and in pots and container gardens - allowing automated watering of plants on decks and patios. Mist emitters can also be used in pot, both on the ground and hanging, with humidity-fog watering for epiphytes and ferns replicating habitats.

In the Horticulture industry, wholesale growers and plant nurseries often use the trickle emitters for 5-US-gallon (19 L) and larger container stock, to automate watering. Attached to longer supply tubing on short stakes, they are easily movable to new containers when stock is moved or sold. Mist emitters are used for propagation, epiphytes, and other plants needing higher humidity.

Micro-sprinklers
Low volume micro-sprinklers may be attached to hard plastic risers or attached to standard sprinkler heads, but are more typically mounted on stakes and attached to small diameter micro-tubing connected to polyethylene tubing with a barbed connector. Some micro-sprinklers have a fixed spray or stream pattern, while others rotate. These are installed above ground and are often used for fruit and nut orchards and vineyards. These systems are expensive, even for large-scale agricultural use, and are predominantly used for high-value crops.

Macro-Drip irrigation
High-volume, low-pressure irrigation systems for container gardening are known as Macro-Drip. A pressure regulator lowers the water pressure to under 30 pounds per square inch while a relatively large diameter hose or pipe delivers the water directly to a sprinkler head.[1] This allows a larger volume of water to reach the flowerpot in a short amount of time, which will then be absorbed into the roots of the plant.

Sprinkler
Sprinkler Irrigation[2] is the process of providing water to your land. This process works with the number of pipes. It is then partitioned with the help of Sprinklers that spreads the water all over in an equal balance. One can gain optimum solutions by installing sprinkler Irrigation. Sprinkler Irrigation helps in decreasing the labor cost saves upto 20% - 40% water supply. It can be applied to any soil that helps to increase crop production. There are a wide variety of sprinklers available in the market. One can choose carefully from the best of sprinkler systems.

Ecological restoration and phytoremediation projects
Low-flow irrigation systems are used on some native plant habitat restoration and environmental remediation projects. The lower operating pressure can be the only choice for remote locations with wells or small storage tank water sources. It is used in temporary installations during initial establishment periods, and being on the soil surface easily removable with minimal damage to the recovering plant community. An example is its use in riparian zone restoration, and environmental remediation projects using Phytoremediation and Bioremediation techniques.

Water conservation and regulations
As municipal and agricultural water supplies become more limited; through increased population demands, droughts, and climate change; city, water district, and state-province level regulations and codes are beginning to encourage, offer rebates with use, or mandate significantly reduced water allowances, at higher costs, that are bringing many water conservation products and techniques both to the forefront and more competitively matched to traditional irrigation system costs.

Use of micro-irrigation systems on green building candidate projects can help them to accumulate points for LEED - (Leadership in Energy and Environmental Design) certification rating and awards.

See also
Deficit irrigation
Drip irrigation
Irrigation in viticulture
Groundwater recharge
Water conservation
References
Garden Time TV (2019-04-26), Daisy Rain Garden System, retrieved 2019-04-29
"How do Sprinkler Irrigation Systems Work? | Automat Industries". Automat Irrigation Blog. 2019-08-06. Retrieved 2019-09-18.
This article incorporates public domain material from the Congressional Research Service document "Report for Congress: Agriculture: A Glossary of Terms, Programs, and Laws, 2005 Edition" by Jasper Womach.
External links
DWP-Be Water wise blog: "The Garden Spot"
Categories: Irrigation Low-flow irrigation systems Water conservation Sustainable agriculture Sustainable gardening



What is the best pipe for irrigation system?
Our irrigation sprinkler hose is one of best pipes for irrigation.

How does a lawn irrigation system work?
Use our irrigation sprinkler hose can irrigate garden or lawn well.

How much is irrigation pipe?
Sprinkler hose irrigation is an excellent choice of low cost.

How do you connect PVC to sprinklers?
Our irrigation sprinkler hose has many fittings to connect PVC pipe.

AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose: Revolutionizing Farm Irrigation and Garden Irrigation
If you're looking for an efficient and advanced solution to improve your farm irrigation system, look no further than the AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose. With its advanced construction and unique design, this sprinkler hose is set to revolutionize the way you approach irrigation.
Introduction
In the realm of agriculture, efficient irrigation plays a crucial role in ensuring healthy crop growth and maximizing yields. The AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose has emerged as a game-changing solution that addresses the limitations of traditional sprinkler hoses.
Understanding Sprinkler Hose Irrigation
A sprinkler hose is a specialized tool used for irrigating fields. It is a flat hose with numerous pores along its length, allowing it to spray water mistily across the area it covers. Commonly referred to as a rain pipe, rain tape, or micro spray tube, this innovation in irrigation has simplified the way farmers water their crops.
Compared to traditional drip tape irrigation systems, the sprinkler hose irrigation system has many benefits:
1. Easy to set up
Sprinkler hose irrigation systems are very easy to install and very simple to set up. Rewinding is also easy; the sprinkler hose can be rolled up for storage using our roll-up equipment.
2. Easy to maintain
The simple design of this system minimizes clogging. For occasional blockages, it is not difficult to clear them.
3. Excellent durability
The sprinkler hose is treated with anti-UV protection and only works at low pressure, making it very durable. In addition, it has a low clogging rate and is easy to clear, further extending its service life.
4. Similar to natural drizzle
The sprinkler hoses gently spray, watering the crops like a natural drizzle, meeting to the nature of the crops in the natural environment.

While the sprinkler hose design offers numerous advantages, certain limitations of the single sprinkler hose (rain pipe) persist.

The Challenges of Traditional Single Sprinkler Hoses (Rain Pipes)
However, traditional single sprinkler hoses come with their own set of challenges. When water is sprayed, the cylindrical hose body may cause some sections of spray to turn aside, leading to inaccurate irrigation coverage. Additionally, these hoses are susceptible to damage from external factors such as stones and animal bites.
Innovative Design of AJ-103 DEAR DEER Sprinkler Hose
The AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose stands out with its innovative design. Unlike single hoses, it incorporates two smaller hoses at the edges of the main hose. These small hoses act as stabilizers and air bags, ensuring that the main hose maintains a consistent water spray direction. This design not only enhances accuracy but also protects the main hose from potential damage.
Key Features of AJ-103 DEAR DEER Sprinkler Hose
• Steady Spray Direction: The auxiliary hoses prevent the main hose from turning aside, ensuring precise water distribution.
• Protection against Damage: The small hoses shield the main hose from potential scratches and bites, thus prolonging its lifespan.
• Effortless Maintenance: The system can operate without filters in relatively clean water conditions, and occasional flushing is all that's needed.
• Wide Applicability: Suitable for various dryland crops and different types of farmlands, including sandy land and greenhouses.
Benefits of Using Triple Irrigation Sprinkler Hose
The AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose offers numerous benefits, including:
• Labor Cost Savings: With accurate and consistent irrigation, the need for manual adjustments and patrols is minimized.
• Quick Irrigation: The mist-like spray ensures rapid and efficient coverage of the fields.
• Low Energy Consumption: The low operating pressure and energy-efficient design make it environmentally friendly.
• Easy Installation: Setting up the system is straightforward, and it's equally easy to maintain.
• Enhanced Crop Growth: Precise irrigation promotes healthy crop growth and higher yields.
Easy Installation and Maintenance
Installing the AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose is hassle-free, and its low maintenance requirements make it a farmer's best friend. By releasing the end clip and flushing out any dirt that accumulates, the system remains efficient and effective.
Suitability for Different Crops and Farmlands
One of the major advantages of this irrigation system is its adaptability. It can be used in various farming scenarios, including open fields, greenhouses, and net houses. The design and pore patterns can be tailored to suit the specific watering needs of different crops.
Extending Service Life and Reducing Damages
The innovative design not only ensures accurate irrigation but also extends the service life of the hose. The auxiliary hoses protect the main hose from potential sources of damage, such as rocks and animal bites, resulting in a longer-lasting and more cost-effective solution.
DEAR DEER: A Trusted Brand in Irrigation
The "DEAR DEER" brand has gained recognition in China, Southeast Asia, and Taiwan for its high-quality irrigation solutions. With a focus on innovation and customer satisfaction, the brand continues to expand its presence across the globe.
Global Expansion of DEAR DEER Products
The success of the "DEAR DEER" products has paved the way for their introduction to new markets worldwide. As the reputation of these innovative irrigation solutions grows, more farmers can benefit from their features and advantages.
Conclusion
In the world of modern agriculture, precision and efficiency are key. The AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose offers a groundbreaking solution to traditional irrigation challenges. With its unique design, ease of use, and remarkable benefits, it has the potential to transform the way farmers approach irrigation, leading to healthier crops and increased productivity.
FAQs
How does the AJ-103 DEAR DEER Sprinkler Hose differ from traditional sprinkler hoses (rain pipe)?
The AJ-103 DEAR DEER Sprinkler Hose stands out due to its innovative design featuring two auxiliary hoses at the edges of the main hose. These smaller hoses ensure a steady spray direction and protect the main hose from damage. Unlike traditional sprinkler hoses (rain pipes) that may turn aside during operation, the AJ-103 maintains accurate irrigation coverage.

Can the system operate without filters?
Yes, the system can operate without filters in relatively clean water conditions. This is a notable advantage, as it simplifies maintenance. Periodic flushing of the hose to clear any accumulated dirt is sufficient to keep the system functioning effectively.

What is the lifespan of a sprinkler hose?
The lifespan of a sprinkler hose typically ranges from 2 to 5 years, depending on usage and maintenance. Opting for a protection sprinkler hose, such as the AJ-103 DEAR DEER Sprinkler Hose, can help reduce potential damages and extend its service life. You can roll all types of sprinkler hose with our winder to roll them after planting season and store them for next planting season.

Is the system suitable for all types of crops?
Yes, the system is versatile and suitable for a wide range of crops. Its design can be customized to accommodate different watering requirements. Whether you're dealing with open fields, greenhouses, net houses, or dry farmlands, the AJ-103 DEAR DEER Sprinkler Hose can be tailored to meet the needs of various crops.

Where can I access the AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose?
You can access the AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose by mailing deardeer@anja.com.tw or calling +886-73720158. We will provide you with more information about the product and how to acquire it for your irrigation needs.

• AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose has the best construction to protect the sprinkler hose. The best designed to overcome the shortcomings of the single sprinkler hose. It saves a lot of labor costs to patrol the field to find side sprays and turn the hoses. A sprinkler hose is a flat hose with many pores on the hose to spray water mistily, also named a rain pipe, rain tape, micro spray tube, etc. Sprinkler hose irrigation system is easy to install, easy to maintain, low cost, easy plug clearing, quick irrigation, and low water pressure, low energy consumption. When laid on the ground, water is sprayed upwards. At first, a sprinkler hose is a simple single flat hose. When filled with water, the flat hose expands into a cylindrical, which makes the hose body easy to turn aside, so that the sprays from pores are turned aside, and the water falls down at the wrong areas too. Far away from the areas we want to irrigate. Therefore, when water is spraying, we must patrol the field to find side sprays and turn the hose, letting the sprays back in the correct direction. This is tiresome work, wastes a lot of labor cost and makes us wet all over. In addition, the thin wall of the flat hose may be scratched by stones and other objects on the field at 2 edges while it lay on the ground and moved. Also, the animals in the field, such as the rats, may bite the flat hose from the edges. AJ-103 DEAR DEER Triple Irrigation Sprinkler Hose has 2 small hoses at both edges of the main sprinkler hose. The main hose spray water and the small hoses are like 2 airbags. They keep the main hose water spray direction steady, letting the water fall down at the right area, protecting the main hose not be scratched or bitten, and extending service life. Sprinkler hose irrigation systems can operate without filters at the head of the system if the water is not very dirty. Just release the end clip of the sprinkler hose sometimes and flush out the dirt inside the hose. Then fold the end of the hose and clip it again. It is suitable for any dryland crops. There are different types of hoses, and different watering pore patterns for different crops and different farmlands. Can be used to open farmland, sandy land, greenhouses, net houses etc. It is suitable for crop nursery or the plants those require more water in a short time. The use life of a sprinkler hose is about 2-5 years, depending on how to use and how to maintain. Choose protection sprinkler hose can reduce the damages, keeping service life. Irrigation Sprinkler Hose is a thin flat hose with some tiny pores on the wall for farm irrigation. In general, it is rolled up like a tape roll. , Irrigation Sprinkler Hose is also said as sprinkler tape, rain tape, rain pipe, rain hose, micro spray tube, micro spray hose, soaker hose, kansui tube, selang irigasi, etc. This irrigation system is suitable for any dryland crops. With different types and pore patterns, it is used in farm irrigation for different crops at different farmlands such as sandy land, open field, greenhouses, net house, etc. DEAR DEER sprinkler hose irrigation system is low material cost, clogging preventing, quick watering, low operating pressure, energy saving, easy to install and maintain. It irrigates gently, just like natural light rain. Most of Sprinkler hose lay on the ground, but some types are laid under mulch film or hang on the air. AJ-103 triple irrigation sprinkler hose: there are two small tubes with no perforation run at two sides of main sprinkling hose. The small tubes can protect main hose not to be destroyed from scrape or animal bite at farmland. Also it is steady when it is sprinkling then keep sprinkling direction correct.

• Irrigation Sprinkler hose is a tape like flat garden hose. This flat garden hose have many tiny holes on the flat hose wall. It is a micro irrigation system, mistier than any irrigation sprinklers. We can easily install several sprinkler hoses with T fittings, rigid pipes or flexible pipes and control valve as a farm irrigation system which easy to be maintained, cost-efficient, easy block elimination, short irrigation time, low irrigation pressure & energy. It is useful for field irrigation of crops in dry farmland. Our sprinkler hose branded "DEAR DEER" is famous in China, south east Asia and Taiwan and win high reputation. Now our "DEAR DEER" products are continually expanding to more countries around world.

• There are different ways to sprinkle for different farming such as open field, greenhouse, net house etc. This flat hose is especial useful for the plants which need water in short time.

• Useful life of sprinkler hose is around 2 to 5 years depended on your need. Our sprinkler hose branded "DEAR DEER" is famous in China, south east Asia and Taiwan and win high reputation. Now our "DEAR DEER" products are continually expanding to more countries around world.

From Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/Micro-irrigation

Micro-irrigation, also called localised irrigation, low volume irrigation, low-flow irrigation, or trickle irrigation is an irrigation method with lower pressure and flow than a traditional sprinkler system. Low volume irrigation is used in agriculture for row crops, orchards, and vineyards. It is also used in horticulture in wholesale nurseries, in landscaping for civic, commercial, and private landscapes and gardens, and in the science and practice of restoration ecology and environmental remediation.


Contents
Description
There are several types of micro-irrigation systems. Many of the components are the same for all of these types of systems. Most systems typically include filters, pipes, valves, and tubing. The main difference is in the type of emission device that is used to deliver the water to the plants. Drip irrigation utilizes drip emitters that deliver water at very low rates. The typical range is 0.2 to 4.0 gallons per hour. In some systems, the emitters are installed manually on the outside of the tubing and placed where needed. Other systems might use integral dripper line or drip tape with the emitters already installed at a predetermined spacing. Micro-sprinklers, which can include fixed stream sprays and rotating spinners typically deliver water at a higher rate, such as 10 to 25 gallons per hour and will cover a larger area than drip emitters. These are more typically used in tree orchards where the plants are larger. The goal is to distribute water slowly in small volumes and target it to plants' root zones with less runoff or overspray than landscape and garden conventional spray and rotary sprinklers. The low volume allows the water to penetrate and be absorbed into slow-percolation soils, such as clay, minimizing water runoff.

System components
There are a wide variety of system components included in a micro-irrigation systems. Most systems include a filter. These may include pre-filters, sand separators, media filters, screen filters, and disc filters. The level of filtration required depends on the size of the emission device and the quality of the water source. A pressure regulator or regulating valve may be required to reduce the system pressure to the desired level. Automatic or manually operated valves will be required to switch from one irrigated section to another. An irrigation controller will be used with automatic systems and may also be needed for back flushing the filter or sand separator. Since water conservation is a frequent reason for choosing micro-irrigation systems, soil moisture sensors, rain shutoff sensors, and sometimes even weather stations may be installed.

Emission devices
Microtubing
Microtubing is one of the oldest types of drip irrigation devices and was used in greenhouses in the 1970s. It consists of a very small diameter tubing. Flow is regulated purely by the length and diameter of the tubing. Weights or stakes are sometimes attached to the end of the tubing to keep it in place.

Fixed flow drip emitters
Low-flow irrigation systems in gardens using drip apply water through two methods:

pre installed small holes in small diameter tubes placed on or below the surface or
self cleaning emitters, in different precipitation rates, pre installed or contractor installed for different rate emitters on same supply line (i.e. trees-higher, perennials-lower). The Flexible supply pipe can be buried either underground or pinned on the surface and buried under
Low volume irrigation systems often use the two delivery components of drip systems to apply water through small holes in small diameter tubes placed on or below the surface of the field. This is done instead of agricultural surface irrigation and furrow irrigation for vegetables, fruits and berries, and other high-value crops.

Adjustable drip emitters
Trickle emitters, also called 'spider sprays,' come in fixed or adjustable radius shapes and diameters, and are installed directly on the flexible supply pipe or on tubing connected to it, and mounted on small stakes. Trickle emitter-'Spider sprays' work well for plants with more fibrous root systems, tree and large shrub basins, and in pots and container gardens - allowing automated watering of plants on decks and patios. Mist emitters can also be used in pot, both on the ground and hanging, with humidity-fog watering for epiphytes and ferns replicating habitats.

In the Horticulture industry, wholesale growers and plant nurseries often use the trickle emitters for 5-US-gallon (19 L) and larger container stock, to automate watering. Attached to longer supply tubing on short stakes, they are easily movable to new containers when stock is moved or sold. Mist emitters are used for propagation, epiphytes, and other plants needing higher humidity.

Micro-sprinklers
Low volume micro-sprinklers may be attached to hard plastic risers or attached to standard sprinkler heads, but are more typically mounted on stakes and attached to small diameter micro-tubing connected to polyethylene tubing with a barbed connector. Some micro-sprinklers have a fixed spray or stream pattern, while others rotate. These are installed above ground and are often used for fruit and nut orchards and vineyards. These systems are expensive, even for large-scale agricultural use, and are predominantly used for high-value crops.

Macro-Drip irrigation
High-volume, low-pressure irrigation systems for container gardening are known as Macro-Drip. A pressure regulator lowers the water pressure to under 30 pounds per square inch while a relatively large diameter hose or pipe delivers the water directly to a sprinkler head.[1] This allows a larger volume of water to reach the flowerpot in a short amount of time, which will then be absorbed into the roots of the plant.

Sprinkler
Sprinkler Irrigation[2] is the process of providing water to your land. This process works with the number of pipes. It is then partitioned with the help of Sprinklers that spreads the water all over in an equal balance. One can gain optimum solutions by installing sprinkler Irrigation. Sprinkler Irrigation helps in decreasing the labor cost saves upto 20% - 40% water supply. It can be applied to any soil that helps to increase crop production. There are a wide variety of sprinklers available in the market. One can choose carefully from the best of sprinkler systems.

Ecological restoration and phytoremediation projects
Low-flow irrigation systems are used on some native plant habitat restoration and environmental remediation projects. The lower operating pressure can be the only choice for remote locations with wells or small storage tank water sources. It is used in temporary installations during initial establishment periods, and being on the soil surface easily removable with minimal damage to the recovering plant community. An example is its use in riparian zone restoration, and environmental remediation projects using Phytoremediation and Bioremediation techniques.

Water conservation and regulations
As municipal and agricultural water supplies become more limited; through increased population demands, droughts, and climate change; city, water district, and state-province level regulations and codes are beginning to encourage, offer rebates with use, or mandate significantly reduced water allowances, at higher costs, that are bringing many water conservation products and techniques both to the forefront and more competitively matched to traditional irrigation system costs.

Use of micro-irrigation systems on green building candidate projects can help them to accumulate points for LEED - (Leadership in Energy and Environmental Design) certification rating and awards.

See also
Deficit irrigation
Drip irrigation
Irrigation in viticulture
Groundwater recharge
Water conservation
References
Garden Time TV (2019-04-26), Daisy Rain Garden System, retrieved 2019-04-29
"How do Sprinkler Irrigation Systems Work? | Automat Industries". Automat Irrigation Blog. 2019-08-06. Retrieved 2019-09-18.
This article incorporates public domain material from the Congressional Research Service document "Report for Congress: Agriculture: A Glossary of Terms, Programs, and Laws, 2005 Edition" by Jasper Womach.
External links
DWP-Be Water wise blog: "The Garden Spot"
Categories: Irrigation Low-flow irrigation systems Water conservation Sustainable agriculture Sustainable gardening

Irrigation Wings Sprinkler Hose for Efficient Farm Irrigation and Garden irrigation

AN JARL ENTERPRISE CO., LTD. has launched Irrigation Wings Sprinkler Hose that promises to improve the way farmers irrigate their crops. The AJ-104 DEAR DEER Irrigation Wings Sprinkler Hose is an innovative solution that aims to overcome the shortcomings of traditional single sprinkler hose (rain pipe) systems and improve the efficiency of farming operations.

We commit our company to providing high-quality and innovative products to our customers. The Irrigation Wings Sprinkler Hose is a product of our company's dedication to meeting the further needs of farmers and improving their farming practices.

Irrigation sprinkler hose (rain pipe) system is the easiest and cheapest way for farm irrigation and garden irrigation. Not only are they easy to lay out, maintain, and operate, but also there are not many parts to be installed, low clogging, low pressure, and low energy consumption. It irrigates like natural drizzle, cares about the crops gently.

Compared to traditional drip tape irrigation systems, the sprinkler hose irrigation system has many benefits:

1. Ease of Setup and Maintenance
The installation and maintenance of the sprinkler hose system are very easy. Setting up the system is a breeze, and rolling it up with our roll device for storage is equally uncomplicated. This system's straightforward design minimizes clogs and simplifies the process of clearing any blockages that may occur.

2. Durability and imitate nature
The durability of the sprinkler hose is evident in its Anti-UV treatment and low- pressure operation. The gentle falling from spraying of sprinkler hose watering the crops like a drizzle.

While the single sprinkler hose (rain pipe) design offers numerous advantages, certain limitations persist.

Traditional single sprinkler hose (rain pipe) is a single flat hose that comes with many pores for micro-irrigation. The AJ-104 DEAR DEER Irrigation Wings Sprinkler Hose features two wings at both edges that protect and keep the main sprinkler hose steady.

Compared to traditional single sprinkler hose (rain pipe), Wings Sprinkler Hose eliminates the need for constant patrolling and turning the sprinkler hose (rain pipe). The body of traditional sprinkler hose (rain pipe) may turn aside. That cause spraying to wrong area, patrolling and turning the sprinkler hoses (rain pipe) are necessary. But Wings Sprinkler Hose keeps steady and sprays in the right direction, providing water where it needed and reducing water waste. The wings also protect the main pores hose from scratches and bites, extending its lifespan and reducing the risk of damage.

The product is available in three types to meet the varying needs of customers. The AJ-104 is the standard type, while the AJ-104S has shorter wings and is more cost-effective. To use for the different way, the AJ-104H has holes on the wings, making it easy to hang for overhead spray and keep headroom on the ground.

To learn more about AN JARL ENTERPRISE CO., LTD. and our products, contact to mail deardeer@anja.com.tw.

• AJ-104 DEAR DEER irrigation wings sprinkler hose is a good type for protecting sprinkler hose. It is designed to overcome the shortcomings of the single sprinkler hose. Saves a lot of labor cost to patrol in the field to find side sprays and turn the hoses. Irrigation sprinkler hose also named as rain pipe, rain tape, micro spray tube etc. It is a flat hose with many pores on the hose for micro irrigation. When laid on the ground, water is sprayed upwards. Its hose wall is thin and operates in low water pressure, low energy consumption. In addition, the sprinkler hose irrigation system is easy to set up, easy to be maintained, low pores clog and easy clog cleaning. Compared with other micro irrigation systems, the sprinkler hose irrigation system is the lowest cost one. Sprinkler hose irrigation systems can operate without filters at the head of the system if the water is not very dirty. Just release the end clip of the sprinkler hose sometimes and flush out dirt inside the hose. Then fold the end of the hose and clip it again. At first, a sprinkler hose is a simple single flat hose. When filled with water, the flat hose expands into a cylindrical, that makes the hose body easy to turn aside, so that the sprays from pores are turned aside the water falls down at the wrong areas too. Far away from the areas we want to irrigate. Therefore, when water is spraying, we must patrol in the field to find side sprays and turn the hose, letting the sprays back in the correct direction. This is tiresome work, wasting a lot of labor cost and makes us wet all over. In addition, the thin wall of the flat hose may be scratched by stones and other objects on the field at 2 edges while it lay on the ground and moved. Also, the animals in the field, such as the rats, may bite the flat hose from edges. AJ-104 DEAR DEER irrigation wings sprinkler hose has 2 wings at both edges of main sprinkler hose. It can keep steady, make the hose not to turn aside, not to twist, keep the body of the hose balanced. The pores on the hose spray in the right direction and water at the certain area we need. We don’t need to waste time to patrol and turn the sprinkler hose. In addition, the wings protect the main pores hose from being scratched or bitten. Reduce the accident of unexpected damages on the sprinkler hose, extending service life.

• For lower cost there is type AJ-104S with shorter wings. 

• Also there is type AJ-104H with holes on the wing which can be hung over head by the hooks.

• Irrigation Sprinkler hose is a tape like flat garden hose. This flat garden hose have many tiny holes on the flat hose wall. It a micro irrigation system, mistier than any irrigation sprinklers. DEAR DEER sprinkler hose is also named as sprinkler tape, rain tape, rain pipe, rain hose, micro spray tube, micro spray hose, soaker hose, kansui tube, selang irigasi, irrigation hose etc. Used in garden irrigation and farm irrigation. We can easily install several sprinkler hoses with T fittings, rigid pipes or flexible pipes and control valve as a farm irrigation system which easy to be maintained, cost-efficient, easy block elimination, short irrigation time, low irrigation pressure & energy. DEAR DEER sprinkler hose is useful for field irrigation or garden irrigation of crops in dry farmland. It irrigates gently, just like natural light rain.

• There are different ways to sprinkle for different farming such as open field, greenhouse, net house etc. This flat hose is especial useful for the plants which need water in short time.

From Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/Micro-irrigation

Micro-irrigation, also called localised irrigation, low volume irrigation, low-flow irrigation, or trickle irrigation is an irrigation method with lower pressure and flow than a traditional sprinkler system. Low volume irrigation is used in agriculture for row crops, orchards, and vineyards. It is also used in horticulture in wholesale nurseries, in landscaping for civic, commercial, and private landscapes and gardens, and in the science and practice of restoration ecology and environmental remediation.


Contents
Description
There are several types of micro-irrigation systems. Many of the components are the same for all of these types of systems. Most systems typically include filters, pipes, valves, and tubing. The main difference is in the type of emission device that is used to deliver the water to the plants. Drip irrigation utilizes drip emitters that deliver water at very low rates. The typical range is 0.2 to 4.0 gallons per hour. In some systems, the emitters are installed manually on the outside of the tubing and placed where needed. Other systems might use integral dripper line or drip tape with the emitters already installed at a predetermined spacing. Micro-sprinklers, which can include fixed stream sprays and rotating spinners typically deliver water at a higher rate, such as 10 to 25 gallons per hour and will cover a larger area than drip emitters. These are more typically used in tree orchards where the plants are larger. The goal is to distribute water slowly in small volumes and target it to plants' root zones with less runoff or overspray than landscape and garden conventional spray and rotary sprinklers. The low volume allows the water to penetrate and be absorbed into slow-percolation soils, such as clay, minimizing water runoff.

System components
There are a wide variety of system components included in a micro-irrigation systems. Most systems include a filter. These may include pre-filters, sand separators, media filters, screen filters, and disc filters. The level of filtration required depends on the size of the emission device and the quality of the water source. A pressure regulator or regulating valve may be required to reduce the system pressure to the desired level. Automatic or manually operated valves will be required to switch from one irrigated section to another. An irrigation controller will be used with automatic systems and may also be needed for back flushing the filter or sand separator. Since water conservation is a frequent reason for choosing micro-irrigation systems, soil moisture sensors, rain shutoff sensors, and sometimes even weather stations may be installed.

Emission devices
Microtubing
Microtubing is one of the oldest types of drip irrigation devices and was used in greenhouses in the 1970s. It consists of a very small diameter tubing. Flow is regulated purely by the length and diameter of the tubing. Weights or stakes are sometimes attached to the end of the tubing to keep it in place.

Fixed flow drip emitters
Low-flow irrigation systems in gardens using drip apply water through two methods:

pre installed small holes in small diameter tubes placed on or below the surface or
self cleaning emitters, in different precipitation rates, pre installed or contractor installed for different rate emitters on same supply line (i.e. trees-higher, perennials-lower). The Flexible supply pipe can be buried either underground or pinned on the surface and buried under
Low volume irrigation systems often use the two delivery components of drip systems to apply water through small holes in small diameter tubes placed on or below the surface of the field. This is done instead of agricultural surface irrigation and furrow irrigation for vegetables, fruits and berries, and other high-value crops.

Adjustable drip emitters
Trickle emitters, also called 'spider sprays,' come in fixed or adjustable radius shapes and diameters, and are installed directly on the flexible supply pipe or on tubing connected to it, and mounted on small stakes. Trickle emitter-'Spider sprays' work well for plants with more fibrous root systems, tree and large shrub basins, and in pots and container gardens - allowing automated watering of plants on decks and patios. Mist emitters can also be used in pot, both on the ground and hanging, with humidity-fog watering for epiphytes and ferns replicating habitats.

In the Horticulture industry, wholesale growers and plant nurseries often use the trickle emitters for 5-US-gallon (19 L) and larger container stock, to automate watering. Attached to longer supply tubing on short stakes, they are easily movable to new containers when stock is moved or sold. Mist emitters are used for propagation, epiphytes, and other plants needing higher humidity.

Micro-sprinklers
Low volume micro-sprinklers may be attached to hard plastic risers or attached to standard sprinkler heads, but are more typically mounted on stakes and attached to small diameter micro-tubing connected to polyethylene tubing with a barbed connector. Some micro-sprinklers have a fixed spray or stream pattern, while others rotate. These are installed above ground and are often used for fruit and nut orchards and vineyards. These systems are expensive, even for large-scale agricultural use, and are predominantly used for high-value crops.

Macro-Drip irrigation
High-volume, low-pressure irrigation systems for container gardening are known as Macro-Drip. A pressure regulator lowers the water pressure to under 30 pounds per square inch while a relatively large diameter hose or pipe delivers the water directly to a sprinkler head.[1] This allows a larger volume of water to reach the flowerpot in a short amount of time, which will then be absorbed into the roots of the plant.

Sprinkler
Sprinkler Irrigation[2] is the process of providing water to your land. This process works with the number of pipes. It is then partitioned with the help of Sprinklers that spreads the water all over in an equal balance. One can gain optimum solutions by installing sprinkler Irrigation. Sprinkler Irrigation helps in decreasing the labor cost saves upto 20% - 40% water supply. It can be applied to any soil that helps to increase crop production. There are a wide variety of sprinklers available in the market. One can choose carefully from the best of sprinkler systems.

Ecological restoration and phytoremediation projects
Low-flow irrigation systems are used on some native plant habitat restoration and environmental remediation projects. The lower operating pressure can be the only choice for remote locations with wells or small storage tank water sources. It is used in temporary installations during initial establishment periods, and being on the soil surface easily removable with minimal damage to the recovering plant community. An example is its use in riparian zone restoration, and environmental remediation projects using Phytoremediation and Bioremediation techniques.

Water conservation and regulations
As municipal and agricultural water supplies become more limited; through increased population demands, droughts, and climate change; city, water district, and state-province level regulations and codes are beginning to encourage, offer rebates with use, or mandate significantly reduced water allowances, at higher costs, that are bringing many water conservation products and techniques both to the forefront and more competitively matched to traditional irrigation system costs.

Use of micro-irrigation systems on green building candidate projects can help them to accumulate points for LEED - (Leadership in Energy and Environmental Design) certification rating and awards.

See also
Deficit irrigation
Drip irrigation
Irrigation in viticulture
Groundwater recharge
Water conservation
References
Garden Time TV (2019-04-26), Daisy Rain Garden System, retrieved 2019-04-29
"How do Sprinkler Irrigation Systems Work? | Automat Industries". Automat Irrigation Blog. 2019-08-06. Retrieved 2019-09-18.
This article incorporates public domain material from the Congressional Research Service document "Report for Congress: Agriculture: A Glossary of Terms, Programs, and Laws, 2005 Edition" by Jasper Womach.
External links
DWP-Be Water wise blog: "The Garden Spot"
Categories: Irrigation Low-flow irrigation systems Water conservation Sustainable agriculture Sustainable gardening




What is the best pipe for irrigation system?
Our irrigation sprinkler hose is one of best pipes for irrigation.

How does a lawn irrigation system work?
Use our irrigation sprinkler hose can irrigate garden or lawn well.

How much is irrigation pipe?
Sprinkler hose irrigation is an excellent choice of low cost.

How do you connect PVC to sprinklers?
Our irrigation sprinkler hose has many fittings to connect PVC pipe.

• AJ-104H DEAR DEER 2 wing hanging irrigation sprinkler hose: single sprinkler hose with 2 wings beside at 2 edges. There are some holes on the wings to be hang up.
US design patent No. of our wing hang trampoline sprinkler: US D842,968 S
• We can tie with wires through the holes at the upper objects and let the sprinkler hose hung in the air. That can let us work with no handicap on farmland. The sprinkling of this type can be mistier than other types. There are 3 types of perforation pattern- side ward spray hanging rain pipe, upward spray hanging rain pipe and downward spray rain pipe.  It irrigates gently, just like natural light rain. AJ-104H DEAR DEER 2 wings hanging sprinkler hose can be used as a Trampoline Sprinkler also. We can tie with cable ties through the holes at wing and hang on the wall of trampoline. Trampoline Sprinkler can spray the water inside around the trampoline. This Trampoline Sprinkler make an outdoor spray water park. Let kids have fun summer outdoor. Boys and girls can jump and play water games inside the trampoline. This yard toys sprinkler let backyard changed as a water park for your children.
• US design patent No. of our wing hang trampoline sprinkler: US D842,968 S

• Irrigation Sprinkler hose is a tape like flat garden hose. This flat garden hose has many tiny holes on the flat hose wall. Sprinkler hose is also named as sprinkler tape, rain tape, rain pipe, rain hose, micro spray tube, micro spray hose, soaker hose, kansui tube, selang irigasi, irrigation hose etc. It a micro irrigation system, mistier than any irrigation sprinklers. We can easily install several sprinkler hoses with T fittings, rigid pipes or flexible pipes and control valve as a farm irrigation system which easy to be maintained, cost-efficient, easy block elimination, short irrigation time, low irrigation pressure & energy. It is useful for field irrigation of crops in dry farmland.

• 
  There are 2 wings with holes on the sides of irrigation sprinkler hose (also named rain tape, rain pipe, spray tube etc.). The wing can be threaded through the holes in the wing with wire, hooks, or other strings and connect it with a hanging rope or any fix object (such as the frame pipe of greenhouse) to suspended in the air.
  Indoors, it can be suspended from the roof or wall of greenhouse to spray as a greenhouse irrigation hose downward or side ward. Outdoors, it can be suspended from a sling or fixed on a branch and sprayed downwards or upward.
  2 wings hang sprinkler hose hanging in the air can keep the ground clear, allowing people or agricultural machines to walk or work on the ground. There are three types of spray holes in this sprinkler hose: side spray, downward spray, and upward spray. Side spray is more commonly used.
  Irrigation Sprinkler hose (rain tape, rain pipe, rain hose, spray tube) is a flat hose with many pores on the hose to spray water mistily. Sprinkler hose irrigation system easy to install, easy to maintain, low cost, easy plug clearing, quick irrigation, and low water pressure, low energy consuming.
  It is suitable for any dry land crops. There are different types of hose, different watering pore pattern, for different crops and different farmlands. Can be used to open farmland, sandy land, greenhouses, net house. Especially it is suitable for crop nursery, or the plants require more water in short time.
  The use life of sprinkler hose (rain tape, rain pipe, rain hose, spray tube) is about 2-5 years, depending on how to use and how to maintain.
  Most sprinkler hose (rain tape, rain pipe, rain hose, spray tube) laying on the ground, but some types can be hanged.
  
  

DEAR DEER Short Wings Irrigation Sprinkler Hose for Farm Irrigation and garden irrigation.

In the field of Taiwanese manufacturing, AN JARL ENTERPRISE CO., LTD. stands as a distinguished provider of quality farm implements and irrigation systems for over four decades. Presenting the DEAR DEER Short Wings Irrigation Sprinkler Hose, the company sets its sights on solving the farmer’s irrigation troubles.

The progress of Irrigation: DEAR DEER Short Wings Irrigation Sprinkler Hose
The DEAR DEER Short Wings Irrigation Sprinkler Hose emerges as a progress product in the field of irrigation. The sprinkler hose (rain pipe) takes the form of a flat hose drilled with numerous pores designed for micro-irrigation. Remarkably thin and operational even under low water pressure, the hose showcases exceptional energy efficiency. When positioned on the ground, it releases water in an upward spray pattern, ensuring even and effective irrigation.

The Advantages of Sprinkler Hose (rain pipe) Irrigation
Compared to traditional drip tape irrigation systems, the sprinkler hose irrigation system has many benefits:

1. Ease of Setup and Maintenance
The installation and maintenance of the sprinkler hose system are very easy. Setting up the system is a breeze, and rolling it up with our roll device for storage is equally uncomplicated. This system's straightforward design minimizes clogs and simplifies the process of clearing any blockages that may occur.

2. Durability and nature imitation
The durability of the sprinkler hose is evident in its Anti-UV treatment and low- pressure operation. The gentle falling from spraying of sprinkler hose watering the crops like a drizzle.
While the single flat hose (rain pipe) design offers numerous advantages, certain limitations persist.

3. Overcoming Challenges with DEAR DEER Short Wings
Recognizing the challenges faced by farmers using traditional single sprinkler hose (rain pipe) systems, AN JARL has devised an innovative solution. The DEAR DEER Short Wings Irrigation Sprinkler Hose comes equipped with two short wings placed at the hose's edges. These wings serve multiple purposes:
Protection: The wings shield the main hose from potential scratches or animal bites, safeguarding its integrity and longevity.
Stability: Preventing twisting or turning, the wings ensure the hose remains steady during operation, directing water accurately.
Efficient Irrigation: By maintaining the correct hose orientation, the wings enable precise water distribution, enhancing irrigation effectiveness and all crops health. Also, it decreases a lot of tiresome works, labor cost wastes, and prevents farmers from wet all over due to patrol for correcting hose orientation in the field.

Pioneering Solutions, Not Just Products
At AN JARL, the commitment goes beyond mere product provision – it's about offering holistic solutions. The DEAR DEER Short Wings Irrigation Sprinkler Hose epitomizes this philosophy. It presents a comprehensive answer to the challenges faced by modern farmers and gardeners.

The Path Forward with AN JARL
Embracing the future of efficient and affordable irrigation, AN JARL's DEAR DEER Short Wings Irrigation Sprinkler Hose is a determination of their dedication to customer satisfaction. As the agricultural landscape evolves, so must irrigation methods. The introduction of the DEAR DEER Short Wings Irrigation Sprinkler Hose marks a significant stride towards effective and clever farming practices. AN JARL ENTERPRISE CO., LTD. has once again showcased their commitment to innovation and sustainable solutions, improving the way to irrigate crops and gardens. To delve deeper into this product and explore AN JARL's other offerings, simply reach out to deardeer@anja.com.tw for more information.

FAQs about DEAR DEER Short Wings Irrigation Sprinkler Hose
What is the primary function of the DEAR DEER Short Wings Irrigation Sprinkler Hose?
The primary function of this innovative hose is to provide efficient and accurate irrigation for farms and gardens.

How does the sprinkler hose system compare to traditional drip tape irrigation?
Unlike drip tape systems, the sprinkler hose offers easy setup, maintenance, and protection against clogs.

What sets the DEAR DEER Short Wings apart from standard sprinkler hoses (rain pipe)?
The DEAR DEER Short Wings Irrigation Sprinkler Hose boasts added wings that enhance stability, protection, and precise water distribution.

Can the DEAR DEER Short Wings Sprinkler Hose withstand harsh agricultural conditions?
Yes, the hose is designed with durability in mind, ensuring reliable performance even in challenging environments. For example, using river water to provide adequate irrigation for the crops on dry sandy soils where the sandbar is prone to water seepage.

How can I learn more about AN JARL's irrigation solutions?
For more information about the DEAR DEER Short Wings and other innovative products, email deardeer@anja.com.tw.


AJ-104S DEAR DEER Short Wings Irrigation Sprinkler hose: At first, a sprinkler hose is a simple single flat hose. When filled with water, the flat hose expands into a cylindrical, that makes the hose body easy to turn aside, so that the sprays from pores are turned aside, the water falls down at the wrong areas too. Far away from the areas we want to irrigate. Therefore, when water is spraying, we must patrol in the field to find side sprays and turn the hose, letting the sprays back in the correct direction. This is tiresome work, wasting a lot of labor cost and makes us wet all over.
Also, the thin wall flat hose may be scratched by stones or other objects on the field. Also, it may be bitten by animals such as rats.
AJ-104S DEAR DEER Short Wings Sprinkler Hose is designed for providing some basic functions to keep steady and protect the hose. It saves a lot of labor cost to patrol in the field to find side sprays and turn the hoses.
Short wings sprinkler hose (short wings rain pipe, short wings rain tape, short wings spray tube) is for the purpose of protecting the main pores hose with lower cost. There are 2 short wings at both edges of main sprinkler hose. Its wings protect main hose not to be scratched. Also this “short wings sprinkler hose” (short wings rain pipe, short wings rain tape, short wings spray tube) can keep steady because of the wings at 2 edges can support the hose not twist and keep body of hose balance. That can keep pores on the hose to spray in the right direction from beginning to end and watering at a certain range beside the hose. It saves a lot of labor cost to patrol in the field to find side sprays and turn the hoses.
Irrigation Sprinkler hose (rain pipe, rain tape, micro spray tube, micro spray hose, rain hose ) is a flat hose with many pores on the hose to spray water mistily. Its hose wall is thin and operates in low water pressure, low energy consuming. In addition DEAR DEER irrigation sprinkler hose (rain pipe, rain tape, spray tube) irrigation system is easy to install, easy to maintain, easy plug clearing. That makes the sprinkler hose (rain pipe, rain tape, spray tube) irrigation system is the lowest cost irrigation compared with other irrigation systems.
DEAR DEER sprinkler hose irrigation system can operate without filters at head if the water is not very dirty. It only needs to open the end clip of sprinkler hose sometimes and flush out dirt inside the hose. Even if the pores are blocked very much it can be washed the inside of hose with brushing cloth. The way is let brushing cloth plug into hose and let water push it throughout the hose. This way can clean inside adhesion dirt at pores.
But the thin wall flat hose may be scratched while it lay on ground.
AJ-104S DEAR DEER short wings irrigation sprinkler hose (short wings rain pipe, short wings rain tape, short wings spray tube) is for the purpose of preventing the main pores hose. There are 2 short wings at both edges of main sprinkler hose. Its wings protect main hose not to be scratched. Also DEAR DEER short wings irrigation sprinkler hose (short wings rain pipe, short wings rain tape, short wings spray tube) can keep steady for the wings at 2 edges can support the hose not twist and keep body of hose balance. That can keep pores on the hose to spray in the right direction from beginning to end.


From Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/Micro-irrigation

Micro-irrigation, also called localised irrigation, low volume irrigation, low-flow irrigation, or trickle irrigation is an irrigation method with lower pressure and flow than a traditional sprinkler system. Low volume irrigation is used in agriculture for row crops, orchards, and vineyards. It is also used in horticulture in wholesale nurseries, in landscaping for civic, commercial, and private landscapes and gardens, and in the science and practice of restoration ecology and environmental remediation.


Contents
Description
There are several types of micro-irrigation systems. Many of the components are the same for all of these types of systems. Most systems typically include filters, pipes, valves, and tubing. The main difference is in the type of emission device that is used to deliver the water to the plants. Drip irrigation utilizes drip emitters that deliver water at very low rates. The typical range is 0.2 to 4.0 gallons per hour. In some systems, the emitters are installed manually on the outside of the tubing and placed where needed. Other systems might use integral dripper line or drip tape with the emitters already installed at a predetermined spacing. Micro-sprinklers, which can include fixed stream sprays and rotating spinners typically deliver water at a higher rate, such as 10 to 25 gallons per hour and will cover a larger area than drip emitters. These are more typically used in tree orchards where the plants are larger. The goal is to distribute water slowly in small volumes and target it to plants' root zones with less runoff or overspray than landscape and garden conventional spray and rotary sprinklers. The low volume allows the water to penetrate and be absorbed into slow-percolation soils, such as clay, minimizing water runoff.

System components
There are a wide variety of system components included in a micro-irrigation systems. Most systems include a filter. These may include pre-filters, sand separators, media filters, screen filters, and disc filters. The level of filtration required depends on the size of the emission device and the quality of the water source. A pressure regulator or regulating valve may be required to reduce the system pressure to the desired level. Automatic or manually operated valves will be required to switch from one irrigated section to another. An irrigation controller will be used with automatic systems and may also be needed for back flushing the filter or sand separator. Since water conservation is a frequent reason for choosing micro-irrigation systems, soil moisture sensors, rain shutoff sensors, and sometimes even weather stations may be installed.

Emission devices
Microtubing
Microtubing is one of the oldest types of drip irrigation devices and was used in greenhouses in the 1970s. It consists of a very small diameter tubing. Flow is regulated purely by the length and diameter of the tubing. Weights or stakes are sometimes attached to the end of the tubing to keep it in place.

Fixed flow drip emitters
Low-flow irrigation systems in gardens using drip apply water through two methods:

pre installed small holes in small diameter tubes placed on or below the surface or
self cleaning emitters, in different precipitation rates, pre installed or contractor installed for different rate emitters on same supply line (i.e. trees-higher, perennials-lower). The Flexible supply pipe can be buried either underground or pinned on the surface and buried under
Low volume irrigation systems often use the two delivery components of drip systems to apply water through small holes in small diameter tubes placed on or below the surface of the field. This is done instead of agricultural surface irrigation and furrow irrigation for vegetables, fruits and berries, and other high-value crops.

Adjustable drip emitters
Trickle emitters, also called 'spider sprays,' come in fixed or adjustable radius shapes and diameters, and are installed directly on the flexible supply pipe or on tubing connected to it, and mounted on small stakes. Trickle emitter-'Spider sprays' work well for plants with more fibrous root systems, tree and large shrub basins, and in pots and container gardens - allowing automated watering of plants on decks and patios. Mist emitters can also be used in pot, both on the ground and hanging, with humidity-fog watering for epiphytes and ferns replicating habitats.

In the Horticulture industry, wholesale growers and plant nurseries often use the trickle emitters for 5-US-gallon (19 L) and larger container stock, to automate watering. Attached to longer supply tubing on short stakes, they are easily movable to new containers when stock is moved or sold. Mist emitters are used for propagation, epiphytes, and other plants needing higher humidity.

Micro-sprinklers
Low volume micro-sprinklers may be attached to hard plastic risers or attached to standard sprinkler heads, but are more typically mounted on stakes and attached to small diameter micro-tubing connected to polyethylene tubing with a barbed connector. Some micro-sprinklers have a fixed spray or stream pattern, while others rotate. These are installed above ground and are often used for fruit and nut orchards and vineyards. These systems are expensive, even for large-scale agricultural use, and are predominantly used for high-value crops.

Macro-Drip irrigation
High-volume, low-pressure irrigation systems for container gardening are known as Macro-Drip. A pressure regulator lowers the water pressure to under 30 pounds per square inch while a relatively large diameter hose or pipe delivers the water directly to a sprinkler head.[1] This allows a larger volume of water to reach the flowerpot in a short amount of time, which will then be absorbed into the roots of the plant.

Sprinkler
Sprinkler Irrigation[2] is the process of providing water to your land. This process works with the number of pipes. It is then partitioned with the help of Sprinklers that spreads the water all over in an equal balance. One can gain optimum solutions by installing sprinkler Irrigation. Sprinkler Irrigation helps in decreasing the labor cost saves upto 20% - 40% water supply. It can be applied to any soil that helps to increase crop production. There are a wide variety of sprinklers available in the market. One can choose carefully from the best of sprinkler systems.

Ecological restoration and phytoremediation projects
Low-flow irrigation systems are used on some native plant habitat restoration and environmental remediation projects. The lower operating pressure can be the only choice for remote locations with wells or small storage tank water sources. It is used in temporary installations during initial establishment periods, and being on the soil surface easily removable with minimal damage to the recovering plant community. An example is its use in riparian zone restoration, and environmental remediation projects using Phytoremediation and Bioremediation techniques.

Water conservation and regulations
As municipal and agricultural water supplies become more limited; through increased population demands, droughts, and climate change; city, water district, and state-province level regulations and codes are beginning to encourage, offer rebates with use, or mandate significantly reduced water allowances, at higher costs, that are bringing many water conservation products and techniques both to the forefront and more competitively matched to traditional irrigation system costs.

Use of micro-irrigation systems on green building candidate projects can help them to accumulate points for LEED - (Leadership in Energy and Environmental Design) certification rating and awards.

See also
Deficit irrigation
Drip irrigation
Irrigation in viticulture
Groundwater recharge
Water conservation
References
Garden Time TV (2019-04-26), Daisy Rain Garden System, retrieved 2019-04-29
"How do Sprinkler Irrigation Systems Work? | Automat Industries". Automat Irrigation Blog. 2019-08-06. Retrieved 2019-09-18.
This article incorporates public domain material from the Congressional Research Service document "Report for Congress: Agriculture: A Glossary of Terms, Programs, and Laws, 2005 Edition" by Jasper Womach.
External links
DWP-Be Water wise blog: "The Garden Spot"
Categories: Irrigation Low-flow irrigation systems Water conservation Sustainable agriculture Sustainable gardening




watering at a certain range beside the hose.



What is the best pipe for irrigation system?
Our irrigation sprinkler hose is one of best pipes for irrigation.

How does a lawn irrigation system work?
Use our irrigation sprinkler hose can irrigate garden or lawn well.

How much is irrigation pipe?
Sprinkler hose irrigation is an excellent choice of low cost.

How do you connect PVC to sprinklers?
Our irrigation sprinkler hose has many fittings to connect PVC pipe.