Outside Press Long Fix Cap (Set Cap) to keep itself not be moved up away from loose inside pipe such as bamboo not so fit

Description

DJ-105 Outside Press Long Fix Cap (Set Cap) is the same as DJ-103 but longer. The length of this fix cap is 15 cm. There is only a size of this type. It is suitable for 1 1/4” to 1 1/2” support pipe. Especially it is suitable for the supporter of bamboo to build a flat roof net house too.
DEAR DEER Outside Press Long Fix Cap (Set Cap) fix wires with 2 screws to set a plastic disk outside at a long cap body. That keeps itself not be moved up away from loose inside pipe such as bamboo or iron pipe not so fit. DEAR DEER Outside Press Long Fix Cap (Set Cap) also used for the condition that the pipe need longer fix cap though the pipe is fit for this DEAR DEER Outside Press Long Fix Cap (Set Cap).
Set cap or said fix cap is the pivotal component to link pillars and roof wires or ropes. The set cap must be strong and durable enough to support the roof of net house and tighten wires or ropes firmly to resist strong wind. Also it must be UV resistant for using long period. The most import for building flat roof net house is the set caps must be smooth for net fluky sliping on them. They can protect roof net not to be damage when wind move net and fliction with the caps.
DEAR DEER Set Cap has all the advantages mentioned above. In summary the flat roof net hose made from DEAR DEER accessories is strong enough for all the functions. Such as insects prevent, pests prevent, crops protection in heavy rain.
Flat roof net house is a simple, easy, quick and low cost way to build net house. Its structure is like a big mosquito net on a pillars array.
The steps to construct are simple as following:﹕

1. Dig caves on ground, space around 5m each cave, let them composed an array, then stand pipe pillars on the caves. Pipe may be galvanized iron or bamboo.
2. The pillars buried in ground at lease 50cm； Low end of pillar had better stand on a sinking prevent disk to keep it not getting mired down.
3. Bury anchors with hook out of ground at the surround in each row and each column at lease 1m. The anchor may be a section of iron pipe or cement with wire.
4. Put set caps on the tops of pillars, lay steel wires or ropes vertical and horizontal into the gaps of set caps, closely tightens the lids on the set caps. Steel wires or ropes are pushed across through on the tops caps of pillars till the surrounding pillars (at least 2”) then extend to ground anchor and set them firmly.
5. It had better to fasten with tensioners between wire and hook. Tighten wires can support roof not to droop and make the structure strongly steady on ground.
6. Sewing net to suit area and shape of the net hose framework. Note the net at gateway must be 2 layers of mutual cover.
7. Fold the net into a big long strip and lay on the top of pillars array.
8. Spread out the net and make its surround sides to droop down till ground.
9. Fix the down edges of drooping net on ground.
10. Pack a ball in the middle height of the side wall net and fasten the net to ground anchors.
11. The pillars at surround must be bigger than inside pillars to make structure stronger.