Anti Hail Net DIY Round Fixing Cap With Flat Top for steel or galvanized iron round pipe

Description

DEAR DEER DJ-101B Anti Hail Net DIY Round Fixing Cap With Flat Top has a curve flat top. This is the fixing cap for anti hail net setting up with steel or galvanized iron round pipe
Wooden or cement pillars are generally used to set up anti-hail nets. When using wooden or cement columns, a hole must be drilled in the middle of the top of the column, and a screw must be screwed in the hole.
Wooden or cement pillars are very heavy, and each pillar needs to be drilled and inserted a screw in. These make the erection of anti-hail nets a cumbersome task, it takes a lot of time and spend much labor cost.
If we use steel pipes or galvanized iron pipe to replace wooden or cement columns, with our fixing caps, the erection of anti-hail nets will become easier and time-saving.
Our DEAR DEER fixing cap is made of tough high-grade engineering plastics and has an outstanding design. It does not need to drill holes and tight screw on each column, still it can fix the steel ropes and net tightly.
High anti-ultraviolet and cold-proof treatment to protect the fixing cap from sunlight and severe cold. Our DEAR DEER fixing caps are well-known for their reliability and durability. It can withstand extreme heat and cold weather. The service life is more than 10 years.
DEAR DEER fixing cap consists of a lower fixing cap and an upper cover. Their excellent design makes it easy to fasten steel ropes and nets. Make the work of setting up the anti-hail net easier and faster.
When using DEAR DEER fixing cap to set up the anti-hail net, you only need to put the fixing cap on the steel pipe or galvanized iron pipes, and use the tapping screw to fix the lower fixing cap wall on the pipe wall together.
After the lower fixing cap and the pipe are tightly combined, stand the pipe, and the longitudinal steel rope, anti-hail nets, and transverse steel rope are placed in the notch of the lower fixing cap in sequence, then screw the upper cover, the steel ropes and nets can be tightly secured. Fixing with a DEAR DEER fixing cap makes the job done simply and easily.
DEAR DEER fixing cap has two designs according to the difference between the upper cover, the lower fixing cap and the combination method:
DIY fixing cap
This design does not use stainless steel screws to fix the steel ropes on the fixing cap. When fixing the steel ropes, only need to screw the upper cover onto the lower fixing cap tightly.
This design of anti-hail net fixing cap has 2 types. The Item No. are DJ-101A and DJ-101B. Specifications are Ø1", Ø1-1/4", Ø1-1/2", Ø2", Ø2-1/2", Ø3".
Both of DJ-101A and DJ-101B “high fixing cap” have an upper cover with large-spacing female threads.
There are 4 notches on the upper side of the lower fixing cap, which are used to put the steel ropes in a crisscross pattern. Large-spaced male threads are provided on the outer surface of the upper part of the lower fixing cap. The upper cover can be tightened to be combined with the lower fixing cap. Large-spaced threads can easily contain the anti-hail net between the upper covers and lower fixing cap.