DIY Flat High Fix Cap (Set Cap) for thick ropes or wires fixed on the top of pipe pillars to link with other pipe pillars and support flat roof net

Description

DJ-101B DIY Flat High Fix Cap (Set Cap): there is a curve flat top cover with female thread inside. Its curve flat top cover keep roof net not to be wear out and tear easily when the net moved by wind.
The upper side of lower body has 4 gaps to put cross ropes or wires inside. Also at the out circle surface of this upper side is male thread. That lets top cover can be screwed together with down body. The gap depth and top cover height are long enough to suit for thick rope or wire.

Fix cap is the key node for strengthening the flat roof net house
Since the construction of the flat roof net house is very simple, we must pay more attention to strengthening its structure. Of course, the nets and struts must be strong enough to withstand strong winds, heavy rains, and ultraviolet rays in the sun, but the fix caps on the top of the pillars and the ropes or wires that connect each struts are in a more critical position.
There is no doubt that the rope or wire must be strong, but the more important key is that the fix cap must be strong enough to hold the rope or wire tightly.
The fix cap secures the cross ropes or wires to the top of the strut. The ropes or wires securely connect the struts to each other to form the skeleton of the flat roof net house. Therefore, the fix cap must be strong enough to form a solid structure of the flat roof net house.
Our DEAR DEER fix caps are made of tough, advanced engineering plastics with an outstanding design. It can hold the ropes or wires tightly to prevent strong winds from swaying. Its high UV resistance protects the cap from damage by sunlight. Our DEAR DEER fix caps are renowned for their reliability and durability. It has a service life of more than 10 years.
In addition, its sleek top design allows the net of the roof to slide easily as we build the flat roof net house. In addition, it keeps the net on the roof from being worn and torn when the wind blows the net.
The excellent design of our DEAR DEER fix cap makes it easy to secure ropes or wires. In addition, they make the work of building a flat roof net house easier and faster, and allow the net to slide smoothly over the top of the pillar.
DEAR DEER fix cap has 2 designs:
1. DIY fix cap
This design does not use stainless steel screws to secure the rope or wire to the fix cap. When fixing the rope or wire, simply screw the top cover to the lower body of the fix cap set.
This type includes DJ-101A, DJ-101B, DJ-102. These three types of bodies have different top covers, but the design of the lower body is the same. They are covered on galvanized iron pipes of different sizes. Includes 1", 1 1/4", 1 1/2", 2", 2 1/2", 3".
DJ-101A DIY Smooth High Fix Cap: This type has a round top cover with female thread. When we cover the roof net, the dome cover of fix cap allows the roof net to slide easily over the top.
The upper section of the lower body has four vertical gaps, into which 2 ropes or wires can be cross placed. The outer circumferential surface on the upper section of the lower body has a male thread. This allows the top cover to be screwed onto the lower body. The four vertical gaps are relatively high, and both thick ropes and relatively thin steel wires can be placed in.
DJ-101B DIY Flat High Fix Cap: There is a slightly curved flat top cover with female thread. Its curved flat top cover prevents the net on the roof from being easily worn and torn due to the wind.
There are four vertical gaps on the upper section of the lower body for placing the crossed ropes or wires into them. The outer circumferential surface on the upper section of the lower body is also a male thread. This allows the top cover to be screwed onto the lower body. The four vertical gaps are also high, therefore both thick ropes and relatively thin steel wires can be placed in.
DJ-102 DIY Smooth Thin Fix Cap: This type of fix cap also has a top cover with female thread. But the top cover is lower than the DJ-101A. It allows the roof net to slide over the top more easily than the DJ-101A when covering the top net.
The upper section of the lower body has four lower vertical gaps that allow the crossed wires to be placed inside. At the outer circumferential surface of the upper section is also a male thread. This allows the top cover to be screwed onto the lower body. This type of fix cap has low vertical gaps and a low top cover, so it is only suitable for steel wires.
2. Stainless steel screw cap
This design uses two stainless steel screws to secure the wire. To fix the wire, we use a disc to press the wire against the top wall of the fixed cap from external or internal. The top of this design is flat. This increases the contact area with the top mesh. Therefore, when the wind blows the net, the friction of top net will not concentrate on only a small area. That can make the net less likely to be wear and tear.
This type includes DJ-103, DJ-104, DJ-105. The size of the lower body covered on galvanized iron pipes also includes 1", 1 1/4", 1 1/2", 2", 2 1/2", 3".
DJ-103 Outside Press Fix Cap: 2 nuts are embedded in the upper wall of the lower body, and a cross-shaped shallow groove is formed at the top of the upper wall for placing the steel wires. The lid used to hold the cross wires is a thick plastic disc with two holes for the stainless steel screws to pass through. Press the wires to the groove on lower body with the lid then lock the lid with 2 stainless steel screws into the nuts to fix.
DJ-104 Inside Press Fix Cap: This type has no lid. It has a round galvanized iron disc with 2 female threads. The fix cap body has two holes in the top wall for the stainless steel screws to pass through. Near the top, on the wall around the fix cap, there are 2 pairs of corresponding holes that can penetrate each other. Two steel wires pass through two pairs of corresponding holes, forming a cross inside the fix cap. The galvanized iron disc presses the cross wires inside. Tighten the two stainless steel screws from the top of the fix cap to the female thread of the iron disc to fix the wires.
DJ-105 Outside Press Long Fix Cap: Same as DJ-103, but the fix cap body is longer. This type of cap has a length of 15 cm and is available in only one size. It is suitable for 1 1/4" to 1 1/2" support pipes. It can be applied to a flat roof net house with bamboo as a support pipe.

Flat roof net house is a simple, easy, quick and low cost way to make net house. Its structure is like a big mosquito net on a pillars array. It is very usful for crop protection.
Flat roof net house can prevent insecticide; reduce the impaction of heavy rain.
The pillars can be the galvanized iron pipe or bamboo. The pillars material and diameter depend on the strength of structure you need.
Due to the construction of flat roof net house is simple we must to pay more attention to reinforce its structure. Of course the net and pillars must to be strong enough to resist strong wind, heavy rain and UV from sunlight, but the fix caps (set caps) on the top of pillars and the ropes or wires to connect each pillars are at more critical position.
No doubt the ropes or wires must be strong but the more important key is the fix caps (set caps) must strong enough to fix the ropes or wires tightly.
Fix caps (set caps) fix the cross ropes or wires at the top of pillars. The ropes or wires link pillars each other firmly to make up the framework of flat roof net house. Therefore the fix caps (set caps) must to strong enough to make a solid array structure of flat roof net house.
Our DEAR DEER fix cap (set cap) is made from strong high class engineering plastic with excellent design. It can fix ropes or wires tightly to prevent any movement by strong wind. Its high anti UV treatment protects the fix cap (set cap) not to be damaged by sunlight. Our DEAR DEER fix cap (set cap) has a very good reputation for it is reliable and durable. Its use life is more than 10 years.
In addition its smooth top design keep roof net can slip easily while we build the flat roof net house. Also it keep roof net not to be wear out and tear easily due to the net moved by wind.
The excellent design of our DEAR DEER fix caps make it easy to fix the rope or wire. Also they make the building work efficiently and make net smooth slip while draw the net cover on the top of pillars.

But the fix caps are the key nodes of net house. Good fix cap can connect each pillar tightly and keep the strength of all structure. Therefore the fix cap must be strong enough to protect the structure firm from destroys of strong wind and UV.
DEAR DEER fix cap is made from engineering plastic with anti UV treatment. Its design and excellent process make the fix cap’s life for use is more than 10 years.
DEAR DEER DIY fix cap series are the most simple fix cap for the building of flat roof net house. You can fix the wires or ropes on cap manually not need other fastener.
DEAR DEER fix cap series have many sizes from diameter 1” to 3”. Can be used with rope or steel wire, thin or thick.
This DEAR DEER DIY Flat High Fix Cap has a high female thread cover at the fix cap. The low body has male thread with 4 gaps. It is suitable for thick wire or rope to put in the gaps. While we screw cover with body tightly the wire or rope will firmly fixed.