Anti Hail Net DIY Round Fixing Cap With Round Top, Anti Hail Net DIY Round Fixing Cap With Round Top DJ-101A

DEAR DEER anti hail net round fixing cap
In general, to set up anti hail net, the pillars of cement or wood must insert a screw on the middle of the top of the pillar.
Cement or wooden pillars are heavy, especially the cement. That makes the erection of anti-hail nets a troublesome task, it takes a lot of time and costs much labor.
In fact, if we use steel or galvanized iron round pipes to set up anti hail nets, the erection of anti-hail nets can become much easier and time-saving. To put our DEAR DEER round fixing caps on the tops of steel or galvanized iron pipes is the best solution for this way.
Our DEAR DEER fixing cap is made of tough high-grade engineering plastics and has an outstanding design. It does not need to tighten a screw on each pillar, still it can fix the steel ropes and net tightly. Our DEAR DEER fixing cap can be used for any round pillar, including wood or bamboo.
High anti-ultraviolet and cold-proof treatment to protect the fixing cap from sunlight and severe cold. Our DEAR DEER fixing caps are well-known for their reliability and durability. It can withstand extreme heat and cold weather for more than 10 years.
DEAR DEER fixing cap consists of a lower fixing cap and an upper cover. Their excellent design makes it easy to fasten steel ropes and nets. Make the work of setting up the anti-hail net easier and faster.
When using DEAR DEER fixing cap to set up the anti-hail net, you only need to put the fixing cap on the steel or galvanized iron round pipes, and use the tapping screw to fix the lower fixing cap wall on the pipe wall together. In fact, with the same processes to wooden pillars are feasible too, not to screw any screw on the wood.
After the lower fixing cap and the pillar are tightly combined, stand the pillar, and the longitudinal steel rope, anti-hail nets, and transverse steel rope are placed in the notch of the lower fixing cap in sequence, then screw the upper cover, the steel ropes and nets can be tightly secured.
Fixing with a DEAR DEER fixing cap makes the job done simply and easily.
DEAR DEER fixing cap has two designs according to the difference between the upper cover, the lower fixing cap and the combination method:
1. DIY fixing cap
This design does not use stainless steel screws to fix the steel ropes on the fixing cap. When fixing the steel ropes, only need to screw the upper cover onto the lower fixing cap tightly.
This design of anti-hail net fixing cap has 2 types. The Item No. are DJ-101A and DJ-101B. Specifications are Ø1", Ø1-1/4", Ø1-1/2", Ø2", Ø2-1/2", Ø3".
Both of the DJ-101A and DJ-101B “high fixing cap” have an upper cover with large-spacing female threads.
There are 4 notches on the upper side of the lower fixing cap, which are used to put the steel ropes in a crisscross pattern. Large-spaced male threads are provided on the outer surface of the upper part of the lower fixing cap. The upper cover can be tightened to be combined with the lower fixing cap. Large-spaced threads can easily contain the anti-hail net between the upper covers and lower fixing cap.
2. Stainless steel screws fixing cap
This design uses 2 stainless steel screws to fix the steel ropes. When fixing the steel ropes, 2 stainless steel screws must be tightened to make the upper cover to press the steel ropes and net against the top wall of the lower fixing cap. The upper cover is a flat thick disc.
The Item No. of this type is DJ-103. The sizes of the lower fixing cap are Ø1", Ø1-1/4", Ø1-1/2", Ø2".
The DJ-103 “external pressing screw fixing cap” has 2 stainless steel nuts embedded in the upper wall of the lower fixing cap, and there are cross-shaped grooves on the top of the upper wall for putting the steel ropes. The upper cover used to hold the cross ropes is a thick disc with 2 holes for the stainless steel screws to pass through. Tighten the 2 stainless steel screws, the upper cover can press the steel ropes and net against the upper wall of the lower fixing cap to fix them.