Anti-hail net fixing cap for the anti-hail system set up with steel or galvanized iron round pipe

DEAR DEER anti hail net round fixing cap
In general, to set up anti hail net, the pillars of cement or wood must insert a screw on the middle of the top of the pillar.
Cement or wooden pillars are heavy, especially the cement. That makes the erection of anti-hail nets a troublesome task, it takes a lot of time and costs much labor.
In fact, if we use steel or galvanized iron round pipes to set up anti hail nets, the erection of anti-hail nets can become much easier and time-saving. To put our DEAR DEER round fixing caps on the tops of steel or galvanized iron pipes is the best solution for this way.
Our DEAR DEER fixing cap is made of tough high-grade engineering plastics and has an outstanding design. It does not need to tighten a screw on each pillar, still it can fix the steel ropes and net tightly. Our DEAR DEER fixing cap can be used for any round pillar, including wood or bamboo.
High anti-ultraviolet and cold-proof treatment to protect the fixing cap from sunlight and severe cold. Our DEAR DEER fixing caps are well-known for their reliability and durability. It can withstand extreme heat and cold weather for more than 10 years.
DEAR DEER fixing cap consists of a lower fixing cap and an upper cover. Their excellent design makes it easy to fasten steel ropes and nets. Make the work of setting up the anti-hail net easier and faster.
When using DEAR DEER fixing cap to set up the anti-hail net, you only need to put the fixing cap on the steel or galvanized iron round pipes, and use the tapping screw to fix the lower fixing cap wall on the pipe wall together. In fact, with the same processes to wooden pillars are feasible too, not to screw any screw on the wood.
After the lower fixing cap and the pillar are tightly combined, stand the pillar, and the longitudinal steel rope, anti-hail nets, and transverse steel rope are placed in the notch of the lower fixing cap in sequence, then screw the upper cover, the steel ropes and nets can be tightly secured.
Fixing with a DEAR DEER fixing cap makes the job done simply and easily.
DEAR DEER fixing cap has two designs according to the difference between the upper cover, the lower fixing cap and the combination method:
1. DIY fixing cap
This design does not use stainless steel screws to fix the steel ropes on the fixing cap. When fixing the steel ropes, only need to screw the upper cover onto the lower fixing cap tightly.
This design of anti-hail net fixing cap has 2 types. The Item No. are DJ-101A and DJ-101B. Specifications are Ø1", Ø1-1/4", Ø1-1/2", Ø2", Ø2-1/2", Ø3".
Both of the DJ-101A and DJ-101B “high fixing cap” have an upper cover with large-spacing female threads.
There are 4 notches on the upper side of the lower fixing cap, which are used to put the steel ropes in a crisscross pattern. Large-spaced male threads are provided on the outer surface of the upper part of the lower fixing cap. The upper cover can be tightened to be combined with the lower fixing cap. Large-spaced threads can easily contain the anti-hail net between the upper covers and lower fixing cap.
2. Stainless steel screws fixing cap
This design uses 2 stainless steel screws to fix the steel ropes. When fixing the steel ropes, 2 stainless steel screws must be tightened to make the upper cover to press the steel ropes and net against the top wall of the lower fixing cap. The upper cover is a flat thick disc.
The Item No. of this type is DJ-103. The sizes of the lower fixing cap are Ø1", Ø1-1/4", Ø1-1/2", Ø2".
The DJ-103 “external pressing screw fixing cap” has 2 stainless steel nuts embedded in the upper wall of the lower fixing cap, and there are cross-shaped grooves on the top of the upper wall for putting the steel ropes. The upper cover used to hold the cross ropes is a thick disc with 2 holes for the stainless steel screws to pass through. Tighten the 2 stainless steel screws, the upper cover can press the steel ropes and net against the upper wall of the lower fixing cap to fix them.

DEAR DEER DJ-101B Anti Hail Net DIY Round Fixing Cap With Flat Top has a curve flat top. This is the fixing cap for anti hail net setting up with steel or galvanized iron round pipe
Wooden or cement pillars are generally used to set up anti-hail nets. When using wooden or cement columns, a hole must be drilled in the middle of the top of the column, and a screw must be screwed in the hole.
Wooden or cement pillars are very heavy, and each pillar needs to be drilled and inserted a screw in. These make the erection of anti-hail nets a cumbersome task, it takes a lot of time and spend much labor cost.
If we use steel pipes or galvanized iron pipe to replace wooden or cement columns, with our fixing caps, the erection of anti-hail nets will become easier and time-saving.
Our DEAR DEER fixing cap is made of tough high-grade engineering plastics and has an outstanding design. It does not need to drill holes and tight screw on each column, still it can fix the steel ropes and net tightly.
High anti-ultraviolet and cold-proof treatment to protect the fixing cap from sunlight and severe cold. Our DEAR DEER fixing caps are well-known for their reliability and durability. It can withstand extreme heat and cold weather. The service life is more than 10 years.
DEAR DEER fixing cap consists of a lower fixing cap and an upper cover. Their excellent design makes it easy to fasten steel ropes and nets. Make the work of setting up the anti-hail net easier and faster.
When using DEAR DEER fixing cap to set up the anti-hail net, you only need to put the fixing cap on the steel pipe or galvanized iron pipes, and use the tapping screw to fix the lower fixing cap wall on the pipe wall together.
After the lower fixing cap and the pipe are tightly combined, stand the pipe, and the longitudinal steel rope, anti-hail nets, and transverse steel rope are placed in the notch of the lower fixing cap in sequence, then screw the upper cover, the steel ropes and nets can be tightly secured. Fixing with a DEAR DEER fixing cap makes the job done simply and easily.
DEAR DEER fixing cap has two designs according to the difference between the upper cover, the lower fixing cap and the combination method:
DIY fixing cap
This design does not use stainless steel screws to fix the steel ropes on the fixing cap. When fixing the steel ropes, only need to screw the upper cover onto the lower fixing cap tightly.
This design of anti-hail net fixing cap has 2 types. The Item No. are DJ-101A and DJ-101B. Specifications are Ø1", Ø1-1/4", Ø1-1/2", Ø2", Ø2-1/2", Ø3".
Both of DJ-101A and DJ-101B “high fixing cap” have an upper cover with large-spacing female threads.
There are 4 notches on the upper side of the lower fixing cap, which are used to put the steel ropes in a crisscross pattern. Large-spaced male threads are provided on the outer surface of the upper part of the lower fixing cap. The upper cover can be tightened to be combined with the lower fixing cap. Large-spaced threads can easily contain the anti-hail net between the upper covers and lower fixing cap.

DJ-103 Outside Press Fixing Cap (Set Cap): the upper wall of lower body was embed 2 nut inside. There are 2 cross-shaped grooves at the top of the upper wall for placing the wires. The press lid for fixing cross wires is a round disk. It presses cross wires on lower body with 2 stainless steel screws to set in nuts.
DEAR DEER Outside Press Fixing Caps fix wires with 2 stainless steel screws to press a plastic disk outside of the cap. The wires are fix between disk and cap body. With the Outside Screw Fixing Caps the pillars of anti-hail net link each other firmly.

In general, to set up anti hail net, the pillars of cement or wood must insert a screw on the middle of the top of the pillar.
Cement or wooden pillars are heavy, especially the cement. That makes the erection of anti-hail nets a troublesome task, it takes a lot of time and costs much labor.
In fact, if we use steel or galvanized iron round pipes to set up anti hail nets, the erection of anti-hail nets can become much easier and time-saving. To put our DEAR DEER round fixing caps on the tops of steel or galvanized iron pipes is the best solution for this way.
Our DEAR DEER fixing cap is made of tough high-grade engineering plastics and has an outstanding design. It does not need to tighten a screw on each pillar, still it can fix the steel ropes and net tightly. Our DEAR DEER fixing cap can be used for any round pillar, including wood or bamboo.
High anti-ultraviolet and cold-proof treatment to protect the fixing cap from sunlight and severe cold. Our DEAR DEER fixing caps are well-known for their reliability and durability. It can withstand extreme heat and cold weather for more than 10 years.
DEAR DEER fixing cap consists of a lower fixing cap and an upper cover. Their excellent design makes it easy to fasten steel ropes and nets. Make the work of setting up the anti-hail net easier and faster.
When using DEAR DEER fixing cap to set up the anti-hail net, you only need to put the fixing cap on the steel or galvanized iron round pipes, and use the tapping screw to fix the lower fixing cap wall on the pipe wall together. In fact, with the same processes to wooden pillars are feasible too, not to screw any screw on the wood.
After the lower fixing cap and the pillar are tightly combined, stand the pillar, and the longitudinal steel rope, anti-hail nets, and transverse steel rope are placed in the notch of the lower fixing cap in sequence, then screw the upper cover, the steel ropes and nets can be tightly secured.
Fixing with a DEAR DEER fixing cap makes the job done simply and easily.
DEAR DEER fixing cap has two designs according to the difference between the upper cover, the lower fixing cap and the combination method.
Stainless steel screws fixing cap uses 2 stainless steel screws to fix the steel ropes. When fixing the steel ropes, 2 stainless steel screws must be tightened to make the upper cover to press the steel ropes and net against the top wall of the lower fixing cap. The upper cover is a flat thick disc.
The Item No. of this type is DJ-103. The sizes of the lower fixing cap are Ø1-1/4", Ø1-1/2", Ø2".
The DJ-103 “external pressing screw fixing cap” has 2 stainless steel nuts embedded in the upper wall of the lower fixing cap, and there are cross-shaped grooves on the top of the upper wall for putting the steel ropes. The upper cover used to hold the cross ropes is a thick disc with 2 holes for the stainless steel screws to pass through. Tighten the 2 stainless steel screws, the upper cover can press the steel ropes and net against the upper wall of the lower fixing cap to fix them.

The pillars of galvanized iron pipes to set up the anti net may stand on soft ground. In this condition we need sink prevent plastic disk.
DJ-300 sink prevent plastic disk with latches is a plastic disk with some different diameter latches. At the center there is a section of stand pipe. In case of flat roof net house is stand at the ground with low dense soil we must bury this sink prevent plastic disk under the ground to support pipe pillar. While we bury this DEAR DEER sink prevent plastic disk, the pipe pillars stuck at latch and mount vertically at the sections of stand pipe in the center. After we refill the soil, the pipe pillar stand on a wider area disk to support the weight up the ground and not sink. The sizes of latches are. There are 3 diameter types of disk 12cm, 17cm, 21cm.