Outside Press Fix Cap (Set Cap) for fixing wires with a disk to press wires between disk and cap body with 2 screws

Description

DJ-103 Outside Press Fix Cap (Set Cap): the upper wall of lower body was embed 2 nut inside. There are 2 cross-shaped grooves at the top of the upper wall for placing the wires. The press lid for fixing cross wires is a round disk. It presses cross wires on lower body with 2 stainless steel screws to set in nuts.
DEAR DEER Outside Press Fixing Caps fix wires with 2 stainless steel screws to press a plastic disk outside of the cap. The wires are fix between disk and cap body. With the Outside Screw Fixing Caps the pillars of flat roof net house link each other firmly.

Fix cap is the key node for strengthening the flat roof net house

Since the construction of the flat roof net house is very simple, we must pay more attention to strengthening its structure. Of course, the nets and struts must be strong enough to withstand strong winds, heavy rains, and ultraviolet rays in the sun, but the fix caps on the top of the pillars and the ropes or wires that connect each struts are in a more critical position.
There is no doubt that the rope or wire must be strong, but the more important key is that the fix cap must be strong enough to hold the rope or wire tightly.
The fix cap secures the cross ropes or wires to the top of the strut. The ropes or wires securely connect the struts to each other to form the skeleton of the flat roof net house. Therefore, the fix cap must be strong enough to form a solid structure of the flat roof net house.
Our DEAR DEER fix caps are made of tough, advanced engineering plastics with an outstanding design. It can hold the ropes or wires tightly to prevent strong winds from swaying. Its high UV resistance protects the cap from damage by sunlight. Our DEAR DEER fix caps are renowned for their reliability and durability. It has a service life of more than 10 years.
In addition, its sleek top design allows the net of the roof to slide easily as we build the flat roof net house. In addition, it keeps the net on the roof from being worn and torn when the wind blows the net.
The excellent design of our DEAR DEER fix cap makes it easy to secure ropes or wires. In addition, they make the work of building a flat roof net house easier and faster, and allow the net to slide smoothly over the top of the pillar.
DEAR DEER fix cap has 2 designs:
1. DIY fix cap
This design does not use stainless steel screws to secure the rope or wire to the fix cap. When fixing the rope or wire, simply screw the top cover to the lower body of the fix cap set.
This type includes DJ-101A, DJ-101B, DJ-102. These three types of bodies have different top covers, but the design of the lower body is the same. They are covered on galvanized iron pipes of different sizes. Includes 1", 1 1/4", 1 1/2", 2", 2 1/2", 3".
DJ-101A DIY Smooth High Fix Cap: This type has a round top cover with female thread. When we cover the roof net, the dome cover of fix cap allows the roof net to slide easily over the top.
The upper section of the lower body has four vertical gaps, into which 2 ropes or wires can be cross placed. The outer circumferential surface on the upper section of the lower body has a male thread. This allows the top cover to be screwed onto the lower body. The four vertical gaps are relatively high, and both thick ropes and relatively thin steel wires can be placed in.
DJ-101B DIY Flat High Fix Cap: There is a slightly curved flat top cover with female thread. Its curved flat top cover prevents the net on the roof from being easily worn and torn due to the wind.
There are four vertical gaps on the upper section of the lower body for placing the crossed ropes or wires into them. The outer circumferential surface on the upper section of the lower body is also a male thread. This allows the top cover to be screwed onto the lower body. The four vertical gaps are also high, therefore both thick ropes and relatively thin steel wires can be placed in.
DJ-102 DIY Smooth Thin Fix Cap: This type of fix cap also has a top cover with female thread. But the top cover is lower than the DJ-101A. It allows the roof net to slide over the top more easily than the DJ-101A when covering the top net.
The upper section of the lower body has four lower vertical gaps that allow the crossed wires to be placed inside. At the outer circumferential surface of the upper section is also a male thread. This allows the top cover to be screwed onto the lower body. This type of fix cap has low vertical gaps and a low top cover, so it is only suitable for steel wires.
2. Stainless steel screw cap
This design uses two stainless steel screws to secure the wire. To fix the wire, we use a disc to press the wire against the top wall of the fixed cap from external or internal. The top of this design is flat. This increases the contact area with the top mesh. Therefore, when the wind blows the net, the friction of top net will not concentrate on only a small area. That can make the net less likely to be wear and tear.
This type includes DJ-103, DJ-104, DJ-105. The size of the lower body covered on galvanized iron pipes also includes 1", 1 1/4", 1 1/2", 2", 2 1/2", 3".
DJ-103 Outside Press Fix Cap: 2 nuts are embedded in the upper wall of the lower body, and a cross-shaped shallow groove is formed at the top of the upper wall for placing the steel wires. The lid used to hold the cross wires is a thick plastic disc with two holes for the stainless steel screws to pass through. Press the wires to the groove on lower body with the lid then lock the lid with 2 stainless steel screws into the nuts to fix.
DJ-104 Inside Press Fix Cap: This type has no lid. It has a round galvanized iron disc with 2 female threads. The fix cap body has two holes in the top wall for the stainless steel screws to pass through. Near the top, on the wall around the fix cap, there are 2 pairs of corresponding holes that can penetrate each other. Two steel wires pass through two pairs of corresponding holes, forming a cross inside the fix cap. The galvanized iron disc presses the cross wires inside. Tighten the two stainless steel screws from the top of the fix cap to the female thread of the iron disc to fix the wires.
DJ-105 Outside Press Long Fix Cap: Same as DJ-103, but the fix cap body is longer. This type of cap has a length of 15 cm and is available in only one size. It is suitable for 1 1/4" to 1 1/2" support pipes. It can be applied to a flat roof net house with bamboo as a support pipe.


Flat roof net house is a simple, easy, quick and low cost way to build net house. Its structure is like a big mosquito net on a pillars array. It is very useful for crops protection.

Due to the construction of flat roof net house is simple we must to pay more attention to reinforce its structure. Of course the net and pillars must to be strong enough to resist strong wind, heavy rain and UV from sunlight, but the fix caps (set caps) on the top of pillars and the ropes or wires to connect each pillars are at more critical position.
No doubt the ropes or wires must be strong but the more important key is the fix caps (set caps) must strong enough to fix the ropes or wires tightly.
Fix caps (set caps) fix the cross ropes or wires at the top of pillars. The ropes or wires link pillars each other firmly to make up the framework of flat roof net house. Therefore the fix caps (set caps) must to strong enough to make a solid array structure of flat roof net house.
Our DEAR DEER fix cap (set cap) is made from strong high class engineering plastic with excellent design. It can fix ropes or wires tightly to prevent any movement by strong wind. Its high anti UV treatment protects the fix cap (set cap) not to be damaged by sunlight. Our DEAR DEER fix cap (set cap) has a very good reputation for it is reliable and durable. Its use life is more than 10 years.
In addition its smooth top design keep roof net can slip easily while we build the flat roof net house. Also it keep roof net not to be wear out and tear easily due to the net moved by wind.
The excellent design of our DEAR DEER fix caps make it easy to fix the rope or wire. Also they make the building work efficiently and make net smooth slip while draw the net cover on the top of pillars.

There are 2 designs of DEAR DEER Fix Caps:
1. DIY Fix Cap
This design fixes rope or wire on the fix cap (set cap) without stainless screw. While to fix ropes or wires just screw the top cover tight on the lower body of fix cap.
This type includes DJ-101A, DJ-101B, DJ-102. The fix cap bodies of these 3 types have different top cover but the design of lower body is the same. They cover on the galvanized iron pipe with different size. Include 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”.
2. Stainless Steel Screws Fix Cap
This design fixes wire on it with 2 stainless screws. While to fix wires it must to screw a press lid or an inside press piece tight on the body of fix cap. Because of the top of this design is flat. That enlarges the touch area with roof net. Therefore it keep roof net not to be wear out and tear easily when the net moved by wind.
This type includes DJ-103, DJ-104, DJ-105. The sizes of lower body are the same too. Include 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”.

The pivotal component to link pillars and roof wires or ropes is set cap or said fixing cap. The set cap must be strong and durable enough to support the roof of net house and tighten wires or ropes firmly to resist strong wind. Also it must be UV resistant for using long period. The most import for building flat roof net house is the set caps must be smooth for net fluky sliping on them. They can protect roof net not to be damage when wind move net and fliction with the caps.

DEAR DEER Set Cap has all the advantages mentioned above. In summary the flat roof net hose made from DEAR DEER accessories is strong enough for all the functions. Such as insects prevent, pests prevent, crop protection in heavy rain.

This flat roof net house is a low cost net house. It is better than cheap greenhouse, also it can think as a cool greenhouse. With low cost to prevent insects and reduce the impaction of heavy rain.